54VCXHR162245 Rad-Hard 16-bit Transceiver Non Inverting with Resistor

The 54VCXHR162245 is a low voltage CMOS 16 bit bus transceiver (3-state) fabricated with sub-micron silicon gate and five-layer metal wiring C²MOS technology. It is ideal for low power and very high speed 1.65 to 3.6 V applications; it can be interfaced to 3.6 V signal environment for both inputs and outputs. This IC is intended for two-way asynchronous communication between data buses; the direction of data transmission is determined by DIR input. The two enable inputs nG can be used to disable the device so that the buses are effectively isolated. The device circuits is including 26 Ω series resistance in the A and B port outputs. These resistors permit to reduce line noise in high speed applications. Bus hold on data inputs is provided in order to eliminate the need for external pull-up or pull-down resistor. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2 kV ESD immunity and transient excess voltage. All floating bus terminals during high Z State must be held HIGH or LOW.

技术特性
54VCXHR162245 订购信息
订购型号 产品状态 美金价格 数量 封装 包装形式 温度范围 材料声明
RHFXHR162245K03V Active 1.5 1000 Flat-48 Carrier Tape   RHFXHR162245K03V
RHRXHR162245K1 Active 1.5 1000 Flat-48 Carrier Tape   RHRXHR162245K1
DATASHEET
描述 版本 大小
DS3952: Rad hard low voltage CMOS 16-bit bus buffer transceiver (3-state) with 3.6 V tolerant inputs and outputs 8 474KB