ST1480AC 3.3V POWERED, 15KV ESD PROTECTED TRASMIT AT UP TO 12MBPS TRUE RS-485/RS422 TRANSCEIVER

The ST1480A is ±15kV ESD protected, 3.3V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration.

The ST1480A transmits and receives at a guaranteed data rate of at least 12Mbps.

All transmitter outputs and receiver inputs are protected to ±15kV using Human Body Model.

Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state.

The ST1480A input has a true fail-safe feature that guarantees a logic high output if both inputs are open circuit, shorted together or in the presence of a termination with no signal on the bus

技术特性

ESD protection
- ±15kV human body model
- ±8kV IEC 1000-4-2 contact discharge
Operate from a single 3.3V supply -no charge pump required
Interoperable with 5V logic
1µA low current shutdown mode max
Guaranteed 12Mbps data rate
-7 to 12 common mode input voltage range
Half duplex versions available
Industry standard 75176 pinout
Current limiting and thermal shutdown for driver overload protection
Guaranteed high receiver output state for floating, shorted or terminated inputs with no signal present
Allow up to 64 transceivers on the bus

ST1480AC 订购信息

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
ST1480ACDR	Active	1.403	1000	SO-8	Tape And Reel	-40 °C-85 °C	ST1480AC/TR

DATASHEET

下载	描述	版本	大小
ST1480AC	3.3 V powered, 15 kV ESD protected, up to 12 Mbps true RS-485/RS-422 transceiver	3	836KB