STLVDS32B HIGH SPEED DIFFERENTIAL LINE RECEIVERS

The STLVDS32 is a differential line receiver that implements the electrical characteristics of low voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5 V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds and allow operations with a 3.3 V supply rail. This differential receiver provides a valid logical output state with a 3.3 V supply rail. It also provides a valid logical output state with a ±100 mV differential input voltage within the input common mode voltage range. The input common mode voltage allows 1 V of ground potential difference between two LVDS nodes.

The intended application of this device and signalling technique is both point-to-point and multidrop data transmission over controlled impedance media approximately 100 Ω. The transmission media may be printed circuit board traces, backplanes or cables. The ultimate rate and distance of data transfer depend upon the attenuation characteristics of the media and noise coupling to the environment.

The STLVDS32 version is characterized for operation from -55 C to °125 C

技术特性

Meets or exceeds the requirements of ansi TIA/EIA-644 standard
Operates with a single 3.3 V supply
Designed for signaling rate up to 400 Mbps
Differential input thresholds ±100 mV max
Typical propagation delay time of 2.5 ns
Power dissipation 60 mW typical per receiver at 200 MHz
Low voltage TTL (LVTTL) logic output levels
Pin compatible with the AM26LS32, SN65LVD32
Open circuit fail safe
ESD protection:
7 kV receiver pins
3 kV all pins vs gnd

STLVDS32B 订购信息

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
STLVDS32BDR	NRND		1000	SO-16	Tape And Reel	-40 °C-85 °C	STLVDS32BDR
STLVDS32BTR	NRND		1000	TSSOP 16	Tape And Reel	-40 °C-85 °C	STLVDS32BTR

DATASHEET

下载	描述	版本	大小
STLVDS32B	High speed differential line receivers	13	699KB