STUSB06E 3.3 V USB transceiver
The STUSB06E is a single chip transceiver that complies with the physical layer specifications of the Universal Serial Bus (USB) v2.0 standard. It is powered by external 3.3 V supply and has an integrated 150 k Ω resistor to implement charger detection with weak pull-up method.
The STUSB06E also supports sharing mode when VREG is not present, which allows the D+/Dlines to be shared with other serial protocols.
It supports both full-speed (12 Mbps) and lowspeed (1.5 Mbps) operation. It is also designed to operate down to 1.6 V so that it is compatible with lower system voltages of most portable systems, which include cell phones, PDAs and MP3 players
技术特性
- HBM = ± 9 kV on D+, D- lines, ± 7 kV on VREG
- ± 6 kV ESD compliant to IEC-61000-4-2 on D+, D-, VREG lines
- Separate I/O supply with operation down to 1.6 V
- Integrated 150 k Ω switchable pull-up from D+ to VREG
- Supports host negotiation protocol (DP pull-up auto-connection after SE0)
- SEO active low interrupt in HNP mode (INT, VCC_IO referred)
- Very low power consumption to meet USB 'suspend' current requirements
- No power supply sequencing requirements
- Software controlled re-enumeration (SOFTCON)
- Available in small BCC++16L package 3 mm x 3 mm max thickness 0.80 mm halogen free RoHS compliant package
Circuit Diagram
STUSB06E 订购信息
| 订购型号 | 产品状态 | 美金价格 | 数量 | 封装 | 包装形式 | 温度范围 | 材料声明 |
| STUSB06EHTR | Active | 2.936 | 1000 | SOT-639 16 3x3x0.8 | Tape And Reel | -40 °C-85 °C | STUSB06EHTR |
DATASHEET
| 下载 | 描述 | 版本 | 大小 |
| STUSB06E | DS6000: 3.3 V USB transceiver | 1 | 257KB |
