VN808CM-32-E Octal channel high side driver
The VN808CM-32-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground.
It can be driven by using a 3.3 V logic supply.
Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, channel turns OFF and back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF and will restart only when case temperature has decreased down to TCR(see waveform 3 Figure 6 on page 10). Non overloaded channels continue to operate normally. Device automatically turns OFF in case of ground pin disconnection. This device is especially suitable for industrial applications conform to IEC 61131
技术特性
- VCC/2 compatible input
- Junction over-temperature protection
- Case over-temperature protection for thermal independence of the channels
- Current limitation
- Shorted load protection
- Undervoltage shut-down
- Protection against loss of ground
- Very low stand-by current
- Compliance to 61000-4-4 IEC test up to 4 kV
Circuit Diagram
VN808CM-32-E 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| VN808CMTR-32-E |
Active |
3.933 |
1000 |
PowerSO 36 |
Tape And Reel |
|
VN808CMTR-32-E |
| VN808CM-32-E |
Active |
3.933 |
1000 |
PowerSO 36 |
Tube |
|
VN808CM-32-E |
DATASHEET
| 下载 |
描述 |
版本 |
大小 |
| VN808CM-32-E |
Octal channel high side driver |
5 |
584KB |
APPLICATION NOTES
| 下载 |
描述 |
版本 |
大小 |
| AN2208 |
AN2208: Designing Industrial Applications with VN808/VN340SP High-side Drivers |
1 |
2082KB |
| AN668 |
AN668: A new high power IC surface mount package family: PowerSO-20™ & PowerSO-36 Power IC packaging from insertion to surface mounting |
2 |
599KB |
TECHNICAL ARTICLES
| 下载 |
描述 |
版本 |
大小 |
| TA0331 |
TA0331: A single chip octal high-side driver for process control |
1 |
179KB |
