VNI8200XP Octal high side smart power solid state relay with serial/parallel selectable interface on chip
技术特性
- Output current: 0.7 A per channel
- Serial/parallel selectable interface
- Short-circuit protection
- 8-bit and 16-bit SPI Interface for IC command and control diagnostic
- Channel over-temperature detection and protection
- Thermal independence of separate channels
- Drivers for all type of loads (resistive, capacitive, inductive load)
- Loss of GND protection
- Power Good diagnostic
- Undervoltage shutdown with hysteresis
- Overvoltage protection (VCC clamping)
- Very low supply current
- Common fault open drain output
- IC pre-warning temperature detection
- Channels output disable
- 100 mA high efficiency step-down switching regulator with integrated boot diode
- Adjustable regulator output
- Feed-back disconnection protection
- Switching regulator disable
- 5 V and 3.3 V compatible I/Os
- Channel outputs status LED driving 4 x 4 multiplexed array
- Fast demagnetization of inductive loads
- ESD protection
- Compliant with IEC 61131-2
Circuit Diagram
VNI8200XP 订购信息
| 订购型号 | 产品状态 | 美金价格 | 数量 | 封装 | 包装形式 | 温度范围 | 材料声明 |
| VNI8200XP | Active | 1000 | PowerSSO 36 | Tube | VNI8200XP | ||
| VNI8200XPTR | Active | 1000 | PowerSSO 36 | Tape And Reel | VNI8200XPTR |
DATASHEET
| 下载 | 描述 | 版本 | 大小 |
| VNI8200XP | Octal high side smart power solid state relay with serial/parallel selectable interface on chip | 2 | 755KB |
