The 'ABT16863 are 18-bit noninverting transceivers designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements.
The 'ABT16863 can be used as two 9-bit transceivers or one 18-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the output-enable (OEAB\ or OEBA\) inputs.
When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
| CY74FCT245AT | |
| Voltage Nodes(V) | 5 |
| Vcc range(V) | 4.5 to 5.5 |
| Input Level | TTL |
| Output Level | TTL |
| Output Drive(mA) | -32/64 |
| No. of Outputs | 18 |
| Logic | True |
| Static Current | 17 |
| tpd max(ns) | 3.9 |
| Rating | Catalog |
| Technology Family | ABT |
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74ABT16863DL | ACTIVE | -40 to 85 | 0.95 | 1ku | SSOP (DL) | 48 | 25 | TUBE | |
| SN74ABT16863DLR | ACTIVE | -40 to 85 | 0.80 | 1ku | SSOP (DL) | 48 | 1000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74ABT16863DL | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16863DL | SN74ABT16863DL |
| SN74ABT16863DLR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16863DLR | SN74ABT16863DLR |
