DAC7565 12-Bit, Quad, Ultra-Low Glitch, Voltage Output DAC w/2.5V, 2ppm/°C Int Ref
DAC7565 说明
DAC7565
Resolution(Bits)
12
DAC: Channels
4
Settling Time(µs)
8
Interface
Serial SPI
Output Type
Voltage
Output Range Min.(V or mA)
0
Output Range Max.(V or mA)
5.5
Single/Dual Analog Supply
Single
DNL(Max)(+/-LSB)
0.5
INL(Max)(+/-LSB)
1
INL (+/-)(Max)(%)
0.0244
Monotonicity
12
SNR(Typ)(dB)
81
SFDR(Typ)(dB)
79
Power Consumption(Typ)(mW)
2.9
Architecture
String
Reference: Type
Int/Ext
Analog Voltage AV/DD(Min)(V)
2.7
Analog Voltage AV/DD(Max)(V)
5.5
Logic Voltage DV/DD(Min)(V)
2.7
Logic Voltage DV/DD(Max)(V)
5.5
No. of Supplies (Unipolar)
1
Rating
Catalog
Pin/Package
16TSSOP
Approx. Price (US$)
4.00 | 1ku
Thermal Shutdown
No
Operating Temperature Range(°C)
-40 to 105
The DAC7565 is a low-power, voltage-output, four-channel, 12-bit digital-to-analog converter (DAC). The device includes a 2.5V, 2ppm/°C internal reference (enabled by default), giving a full-scale output voltage range of 2.5V. The internal reference has an initial accuracy of 0.02% and can source up to 20mA at the VREFH/VREFOUT pin. The device is monotonic, provides very good linearity, and minimizes undesired code-to-code transient voltages (glitch). The DAC7565 uses a versatile 3-wire serial interface that operates at clock rates up to 50MHz. The interface iscompatible with standard SPI™, QSPI™, Microwire™, and digital signal processor (DSP) interfaces.
The DAC7565 incorporates a power-on-reset circuit that ensures the DAC output powers up at either zero-scale or mid-scale until a valid code is written to the device.
DAC7565 特性
Relative Accuracy: 0.5LSB
Glitch Energy: 0.15nV-s
Internal Reference:
2.5V Reference Voltage (enabled by default)
0.004% Initial Accuracy (typ)
2ppm/°C Temperature Drift (typ)
5ppm/°C Temperature Drift (max)
20mA Sink/Source Capability
Power-On Reset to Zero-Scale or Mid-Scale
Asynchronous Clear to Zero-Scale or Mid-Scale
Ultra-Low Power Operation: 1mA at 5V
Wide Power-Supply Range: +2.7V to +5.5V
12-Bit Monotonic Over Temperature Range
Settling Time: 10µs to ±0.024% Full-Scale Range (FSR)
Low-Power Serial Interface with Schmitt-Triggered Inputs: Up to 50MHz
On-Chip Output Buffer Amplifier with Rail-to-Rail Operation
