AD9778 Dual 14-Bit, 1 GSPS, Digital-to-Analog Converter
The AD9776/AD9778/AD9779 are dual, 12-/14-/16-bit, high dynamic range, digital-to-analog converters (DACs) that provide a sample rate of 1 GSPS, permitting multicarrier generation up to the Nyquist frequency. They include features optimized for direct conversion transmit applications, including complex digital modulation, and gain and offset compensation. The DAC outputs are optimized to interface seamlessly with analog quad-rature modulators such as the AD8349. A serial peripheral interface (SPI®) provides for programming/readback of many internal parameters. Full-scale output current can be programmed over a range of 10 mA to 30 mA. The devices are manufactured on an advanced 0.18 μm CMOS process and operate on 1.8 V and 3.3 V supplies for a total power consumption of 1.0 W. They are enclosed in 100-lead TQFP packages.
Ultralow noise and intermodulation distortion (IMD) enable high quality synthesis of wideband signals from baseband to high intermediate frequencies.
A proprietary DAC output switching technique enhances dynamic performance.
The current outputs are easily configured for various single-ended or differential circuit topologies.
CMOS data input interface with adjustable set up and hold.
Novel 2×, 4×, and 8× interpolator/coarse complex modulator allows carrier placement anywhere in DAC bandwidth.
Wireless infrastructure
WCDMA, CDMA2000, TD-SCDMA, WiMax, GSM
Digital high or low IF synthesis
Internal digital upconversion capability
Transmit diversity
Wideband communications: LMDS/MMDS, point-to-point
Product Highlights
- Ultralow noise and intermodulation distortion (IMD) enable high quality synthesis of wideband signals from baseband to high intermediate frequencies.
- A proprietary DAC output switching technique enhances dynamic performance.
- The current outputs are easily configured for various single-ended or differential circuit topologies.
- CMOS data input interface with adjustable set up and hold.
- Novel 2×, 4×, and 8× interpolator/coarse complex modulator allows carrier placement anywhere in DAC bandwidth.
Data Sheet, Rev. A, 3/07
产品特点和性能优势Low power: 1.0 W @ 1 GSPS, 600 mW @ 500 MSPS, full operating conditionsSFDR = 78 dBc to fOUT = 100 MHzSingle carrier WCDMA ACLR = 79 dBc @ 80 MHz IFAnalog output: adjustable 8.7 mA to 31.7 mA, RL = 25 Ω to 50 ΩNovel 2×, 4×, and 8× interpolator/coarse complex modulator allows carrier placement anywhere in DAC bandwidthAuxiliary DACs allow control of external VGA and offset controlMultiple chip synchronization interfaceHigh performance, low noise PLL clock multiplierDigital inverse sinc filter100-lead, exposed paddle TQFP package | AD9778 IBIS Models
|
数据手册
应用笔记
订购信息
产品型号 | 封装 | 包装数量 | 温度范围 | 美金报价 100-499 | 美金报价 1000+ | RoHS |
---|
AD9778BSVZ 量产 | 100 ld TQFP-ED(w/ 6.5mm exposed pad) | OTH 90 | -40 至 85至 | 29.7 | 25.25 | Y |
AD9778BSVZRL 量产 | 100 ld TQFP-ED(w/ 6.5mm exposed pad) | REEL 1000 | -40 至 85至 | 0 | 25.25 | Y |
评估板
产品型号 | 描述 | 美金报价 | RoHS |
---|
AD-DAC-FMC-ADP | FMC to High-Speed DAC Evaluation Board Adaptor | 125 | Y |
参考资料