SAK-XC2320S-8F40V AA infineon _ BDTIC 中国领先电子元器件代理商

SAK-XC2320S-8F40V AA

The XC2300S series, with the XC232xS (VQFN-48) and XC231xS (TSSOP-38) derivatives, further enlarges the XC2300 microcontroller family in the ultra lowend. With a maximum memory size of 64kB Flash and up to 8kB RAM, the microcontrollers of this series are well suited for very low-end cost-sensitive safety applications like lowest-end Airbag or Belt Pretensioner applications.

Parametric	SAK-XC2320S-8F40V AA
Clock Frequency max	40.0MHz
SRAM (incl. Cache)	8.0kByte
CAN Nodes	0
A/D Input Lines (incl. FADC)	10
Program Memory	64.0kByte
Type of Memory	Flash
FlexRayTM	no
Number of ADC Modules	1.0
Digital I/O Pins	33
EEPROM Emulation (Data-Flash)	no
Timed I/O Pins (PWM, CAPCOM)	16
Serial I/O Interfaces	2
Type of Serial I/O Interfaces	I²C
Type of Serial I/O Interfaces	I²S
Type of Serial I/O Interfaces	LIN
Type of Serial I/O Interfaces	SPI
Type of Serial I/O Interfaces	UART
Instruction Width ([bits])	16/32
Instruction Set Architecture	C166S V2 (16-bit)
Peripheral Control Processor	no
DMA Channels	8
Timer/Counter	11
External Bus Interface	yes
Fast Flash Programming	yes
Temperature	-40 to 125°C
Power Mode	2
DSP Functionality	yes
On-chip Clock Generation	yes
I/O Operation Voltages	3.3V
I/O Operation Voltages	5.0V
Touch/LED Matrix Control	no
On-chip Voltage Regulator	yes
Real Time Clock	yes
Floating Point Unit	no
Watchdog Timer	yes
Oscillator Watchdog	yes
Qualification	Automotive
Additional Features	no comment

Sales Product Name	SAK-XC2320S-8F40V AA
OPN
Product Status	active and preferred
Package Name	PG-VQFN-48
Completely lead free	no
Halogen free	yes
RoHS compliant	yes
Packing Size	2000
Packing Type	TAPE & REEL

Summary of Features:

Package: PG-VQFN-48
CAN Nodes: 0
Program Memory: 64.0 KByte
FlexRay™: no
Type of Serial I/O Interfaces: SPI, LIN, UART, IIC or IIS

Target Applications:

Lowest-end Airbag
Belt-Pretensioner

Data Sheet

Title	Size	Date	Version
XC2320S Data Sheet,EN	2.7 MB	10 七月 2012	01_02

Application Notes

Title	Size	Date	Version
AP24026 - EMC and System-ESD Design Guidelines for Board Layout；EN	2.9 MB	15 三月 2016	03_05
Power Management with SCU Driver - description	702 KB	13 八月 2013	01_01
XE166/XC2000 Pin Configuration, Power Supply and Reset	1.3 MB	08 六月 2011	01_01
Design Guideline for XC2000 and XE16x Microcontroller Board Layout	823 KB	24 五月 2013	01_02
EEPROM Emulation Driver for XC2000 / XE166 - description	1.2 MB	09 七月 2012	01_03
XC2000 Flashprogramming via CAN BSL - description	1.5 MB	15 十月 2009	01_00
DSP Optimization Guide for XC2000/XC166/XE166 Microcontroller Families with MAC Unit	965 KB	03 一月 2012	01_01

Presentations

Title	Size	Date	Version
XC2000ED Presentation	804 KB	03 四月 2014	01_00

User Manual

Title	Size	Date	Version
XC2000/XE166 Programmers Guide	2.1 MB	15 九月 2010	02_01
C166S V2 Core User's Manual	5.3 MB	02 一月 2012	01_07

Errata Sheet

Title	Size	Date	Version
XC2300S Errata Sheet	1.2 MB	30 九月 2013	01_02
XC2080ED, XC2090ED Errata Sheet	2.9 MB	03 四月 2014	01_06

Evaluation Boards

Board	Family	Description	Status
KIT_DAP_MINIWIGGLER_USB	Microcontroller	The miniWiggler is Infineon’s high performance and cost-efficient debugging tool for the future. On the host side, it has an USB interface, which is available on every computer. On the device side, the communication goes over Infineon 10-pin DAP or 16-pin OCDSL1 interfaces. The miniWiggler has been designed specifically to work in combination with Infineon’s Debug Access Software (DAS).All microcontrollers with DAP interface	active and preferred
KIT_XC2320S_SK	Microcontroller	For evaluation of XC2310S/XC2320S?? including Getting Started, DAVE™, technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging.XC2310SXC2320S	on request