• 简体中文
• English

LTC1322 - RS232/EIA562/RS485 Transceivers

The RS232/EIA562 transceivers operate to 120kbaud and are in full compliance with EIA/TIA-562 specification. The RS485 transceivers operate to 10Mbaud and are in full compliance with RS485 and RS422 specifications. All interface drivers feature short-circuit and thermal shutdown protection. An enable pin allows RS485 driver outputs to be forced into high impedance which is maintained even when the outputs are forced beyond supply rails or power is off. Both driver outputs and receiver inputs feature ±10kV ESD protection. A loopback mode connects the driver outputs back to the receiver inputs for diagnostic self-test.

The LTC1321/LTC1322 can support RS232 voltage levels when 6.5V DDEE>/= –10V. The LTC1335 supports receiver output enable but not RS232 levels. A shutdown mode reduces the IMCC supply current to 15µA.

特点 LTC1321: 2-EIA562/RS232 Transceivers/2-RS485 Transceivers LTC1322: 4-EIA562/RS232 Transceivers/2-RS485 Transceivers LTC1335: 4-EIA562 Transceivers/2-RS485 Transceivers with OE LTC1321/LTC1322 Have the Same Pinout as SP301/SP302 LTC1335 Features Receiver Three-State Outputs Low Supply Current: 1mA Typical 15µA Supply Current in Shutdown 120kBaud in EIA/TIA-562 or RS232 Mode 10MBaud in RS485/RS422 Mode Self-Testing Capability in Loopback Mode Power-Up/Down Glitch-Free Outputs Driver Maintains High Impedance in Three-State, Shutdown or With Power Off Thermal Shutdown Protection I/O Lines Can Withstand ±25V Withstands Repeated 10kV ESD Pulses 典型应用

应用 Low Power RS485/RS422/EIA562/RS232 Interface Cable Repeater Level Translator 封装信息