• 简体中文
• English

LTC3453 - Synchronous Buck-Boost High Power White LED Driver

The LTC®3453 is a synchronous buck-boost DC/DC converter optimized for driving up to 4 white LEDs at a combined current of up to 500mA from a single Li-Ion battery input. The regulator operates in either synchronous buck, synchronous boost, or buck-boost mode, depending on input voltage and LED maximum forward voltage. Optimum efficiency is achieved using a proprietary architecture that determines which LED requires the largest forward voltage drop at its programmed current, and regulates the common output rail for lowest dropout. Efficiency of 90% can be achieved over the entire usable range of a Li-Ion battery (2.7V to 4.2V).

LED current is programmable to one of four levels (including shutdown) with dual current setting resistors and dual enable pins. In shutdown, the supply current is only 6µA.

A high constant operating frequency of 1MHz allows the use of a small external inductor. The LTC3453 is offered in a low profile (0.75mm) thermally enhanced 16-lead (4mm x 4mm) QFN package.

特点 High Efficiency: 90% Typical Over Entire Li-Ion Battery Range Wide VIN Range: 2.7V to 5.5V Up to 500mA Continuous Output Current Internal Soft-Start Open/Shorted LED Protection LED Current Matching Typically <2% Constant Frequency 1MHz Operation Low Shutdown Current: 6µA Overtemperature Protection Small Thermally Enhanced 16-Lead (4mm x 4mm) QFN Package 典型应用

应用 Cell Phones Digital Cameras PDAs Portable Devices 封装信息

演示电路板