LTC660 - 100mA CMOS Voltage Converter

The LTC®660 is a monolithic CMOS switched-capacitor voltage converter. It performs supply voltage conversion from positive to negative from an input range of 1.5V to 5.5V, resulting in complementary output voltages of �1.5V to ±5.5V. It also performs a doubling at an input voltage range of 2.5V to 5.5V, resulting in a doubled output voltage of 5V to 11V. Only two external capacitors are needed for the charge pump and charge reservoir functions. The converter has an internal oscillator that can be overdriven by an external clock or slowed down when connected to a capacitor. The oscillator runs at a 10kHz frequency when unloaded. A higher frequency outside the audio band can also be obtained if the BOOST pin is tied to V+. The LTC660 contains an internal oscillator, divide-by-two, voltage level shifter and four power MOSFETs.

特点
  • Simple Conversion of 5V to -5V Supply
  • Output Drive: 100mA
  • ROUT: 6.5 ohms (0.65V Loss at 100mA)
  • Boost Pin (Pin 1) for Higher Switching Frequency
  • Inverting and Doubling Modes
  • Minimum Open Circuit Voltage Conversion Efficiency: 99%
  • Typical Power Conversion Efficiency with a 100mA Load: 88%
  • Easy to Use
典型应用
LTC660 Typical Application
LTC660 Typical Application
应用
  • Conversion of 5V to ±5V Supplies
  • Inexpensive Negative Supplies
  • Data Acquisition Systems
  • High Current Upgrade to LTC1044 or 7660
封装信息
LTC660 Package Drawing
Order Information 订购型号
器件型号封装温度价格 (以 1 ~ 99 片为批量)价格 (以 1000 片为批量) *
LTC660CN8#PBFN-8C$3.33$2.75
LTC660CS8#PBFSO-8C$3.67$3.00
LTC660CS8#TRPBFSO-8C$3.06
数据表
可靠性数据
LT Journal
CAD 符号
相关产品
LTC660 - 100mA CMOS Voltage Converter
R302 Reliability Data
Sep 2003 Amplifier with Integrated Filter Offers the Best High Speed, Low Noise Interface for Differential DACs and ADCs
LTC660 Footprints and Symbols