Flexmod Liftgate Protector 系列 - Electronic Liftgate Protector Prevents Battery and Motor Damage
数据手册DataSheet 下载:Download FlexMod Liftgate Protector Datasheet

FlexMod Electronic Liftgate Protector prevents damage to batteries and liftgate motor.
When the liftgate is actuated by an external switch, the Liftgate Protector checks the battery voltage. If the voltage is above the pre-set level, it enables the liftgate to work. The Liftgate Protector continues to monitor battery level, and if it falls, the unit will activate an external alarm (typically a blinking light or buzzer) when the operating switch is worked, and prevents activation of the liftgate until the battery level isk restored. An external override switch is available which permits one-time use, so that liftgate can be stowed.
When batteries are overdrawn, irreversible damage can be caused, and expensive batteries will have greatly reduced capacity or need to be replaced. Liftgate Protector prevents excess draw-down of batteries. Liftgate motors are dependent on supplied voltage. When voltage falls, they draw higher and higher current which can readily cause burned out motors. Liftgate protector prevents motor burnout.
功能与特色
订购信息
产品号
说明
Harness Included
可编程型
48535
Unit Only
48535-01
Unit with Harness
•
48735
Programmable Unit Only
•
48735-01
Programmable Unit with Harness
•
•
- Compact design (4" x 3" x 1") unit is waterproof, dustproof and vibration-proof. Mounts anywhere on a vehicle, even places where road-splash is a problem. Sealed to IP67 standard.
- Prevents irreparable damage to starting battery or auxiliary battery caused by excessive draw down of power.
- Prevents burnout of hydraulic system motor caused by low voltage.
- No more stranded vehicles caused by dead starting batteries or a hung-up liftgate.
- Unit is autoranging - senses 12 Vdc or 24 Vdc systems.
- 10A at 85ºC
Ordering 订购信息
产品号 | Case | Connector | 说明 | 详情 | 尺寸规格 | Disconnect voltage (12V) | Disconnect voltage (24V) | 湿度 | Inductive transient | Ingress Protection |
---|
48535 | Blue Thermoplastic | 8-pin Sealed Deutsch type | Flexmod Liftgate Protector Unit | 10 A | 4 x 2.7 x 1.31 | 12.05 V min12.1 V typical12.15 V max | 24.1 V min24.2 V typical24.3 max | 0 to 90% RH | +/- 600 V | IP67 |
48535-01 | Blue Thermoplastic | 8-pin Sealed Deutsch type | Flexmod Liftgate Protector Unit and 12805 Harness | 10 A | 4 x 2.7 x 1.31 | 12.05 V min12.1 V typical12.15 V max | 24.1 V min24.2 V typical24.3 max | 0 to 90% RH | +/- 600 V | IP67 |
48735 | Blue Thermoplastic | 8-pin Sealed Deutsch type | Programmable Flexmod Liftgate Protector Unit | 10 A | 4 x 2.7 x 1.31 | Programmable Attribute | Programmable Attribute | 0 to 90% RH | +/- 600 V | IP67 |
设计资源