数据手册DataSheet 下载:Download FlexMod Lighting Timer Datasheet
The FlexMod Electronic Timer for Lighting prevents the internal lights inside a trailer from being left on and draining the battery. Vehicle operator operates a momentary switch which turns lights on, allowing safe operation inside the cargo compartment. After 20 minutes the FlexMod flashes the lights and gives the operator increasingly urgent warnings to either exit the cargo compartment or reactivate the timer before the lights go out. Perfect for use on delivery vehicles, utility vehicles, trailers or straight trucks. Feature and Benefits 装配: Four 9/32" (7.2mm) dia. holes 尺寸: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm) Operating Sequence Operator turns cargo compartment lights On. After 20 minutes compartment lights provide warning by blinking three times. Operator may re-set switch at this time - cycle will start again. After another 20 seconds, lights blink three times at a faster rate. Operator may re-set switch at this time - cycle will start again. After a further 20 seconds, lights blink three times at a faster rate and then switch Off. Operator may re-set switch at this time - cycle will start again. 订购信息 产品号 说明 Harness Included 48636 Unit Only 48636-01 Unit with Harness •产品号 | Case | Connector | 说明 | 详情 | 尺寸规格 | 湿度 | Inductive transient | Ingress Protection | Load current | Load dump |
---|---|---|---|---|---|---|---|---|---|---|
48636 | Blue Thermoplastic | 8-pin Sealed Deutsch type | FlexMod Trailer Light Timer Unit | 10 A | 4 x 2.7 x 1.31 | 0 to 90% RH | +/- 600 V | IP67 | 10 A at 85C | + 150 V |
48636-01 | Blue Thermoplastic | 8-pin Sealed Deutsch type | FlexMod Trailer Light Timer and 12805 Harness | 10 A | 4 x 2.7 x 1.31 | 0 to 90% RH | +/- 600 V | IP67 | 10 A at 85C | + 150 V |