ARD00385 MCP3911 and PIC18F85K90 Single-Phase Anti-Tamper Energy Meter

The MCP3911 and PIC18F85K90 Single-Phase Anti-Tamper Energy Meter is a fully functional single-phase meter with enhanced capabilities, such as battery backup, RTC and anti-tamper features. The two current channels are measured with the MCP3911 device and the voltage channel is measured with the 12-bit SAR ADC integrated in the microcontroller. This design has two sensors for the current measurements: a current transformer and a shunt. The PIC18F85K90 microcontroller directly drives the LCD and communicates via UART with the MCP2200, offering an isolated USB connection for meter calibration and access to the device power calculations. The system calculates active and reactive energy, active, reactive and apparent power, power factor, RMS current, RMS voltage and the line frequency. The Microchip Energy Meter Software is used to calibrate and monitor the system.

Rated 5(60)A 220V 3200 imp/kWh IEC62053-22 Class 0.5 Energy Meter

Calculates active and reactive energy, active, reactive and apparent power, power factor, RMS current, RMS voltage and the line frequency

Anti-tamper monitoring including neutral monitoring, current circuit reversal, magnetic field disturbance and cover opening detection

Microchip Energy Meter Software is used to calibrate and monitor the system

Calibration can be done in closed loop or open loop

Low-cost capacitive-based power supply design

文档资料与软件下载

Documents	Last Updated	Size
MCP3911 and PIC18F85K90 Energy Meter (ARD00385) Firmware.	5/7/2013 4:48:20 PM	532KB
MCP3911 and PIC18F85K90 Reference Design User's Guide	5/6/2013 9:55:08 AM	1MB
MCP3911 and PIC18F85K90 Energy Meter (ARD00385) BOM	2/28/2013 10:30:08 AM	29KB
MCP3911 and PIC18F85K90 Energy Meter (ARD00385) Gerbers	2/25/2013 1:16:36 PM	703KB
MCP3911 and PIC18F85K90 Energy Meter (ARD00385) Software	2/25/2013 12:50:10 PM	342KB
PIC18F87K90 Family Data Sheet	7/6/2011 12:28:16 PM	4MB