ARD00455 MCP39F501 Energy Metering & Power Monitoring Demonstration Board
The MCP39F501 Power Monitor Demonstration Board is a fully functional single-phase power monitor. This low-cost design does not use any transformers and requires few external components. The device calculates active power, reactive power, RMS current, RMS voltage, power factor, line frequency and other typical power quantities as defined in the MCP39F501 data sheet. The MCP39F501 Power Monitor Utility software is used to calibrate and monitor the system, and can be used to create custom calibration setups. For some accuracy requirements, only a single point calibration may be needed.
Devices Supported: MCP39F501
- Displays Active, Reactive and Apparent Power, RMS Current, RMS Voltage, Line Frequency, Power Factor and Temperature using PC software
- Event notifications, such as Over Current, Over Power, Over/Under Frequency, Over/Under Temperature, and Voltage Sag/Surge
- Device configuration through PC software, including Event Notifications, Gain Calibration, EEPROM, Calculation Multipliers, and I/O settings
- 120V and 220V operation
文档资料与软件下载
| Documents | Last Updated | Size | |
|---|---|---|---|
| MCP39F501 Energy Metering & Power Monitoring Demo Board Software v2.2 | 8/19/2014 3:21:09 PM | 6MB | |
| MCP39F501 Power Monitor Demo Board User's Guide | 2/15/2014 8:41:14 AM | 817KB | |
| MCP39F501 Energy Metering & Power Monitoring Demo Board (ARD00455) BOM | 12/20/2013 9:10:46 PM | 26KB | |
| MCP39F501 Energy Metering & Power Monitoring Demo Board (ARD00455) Gerbers | 12/20/2013 7:54:00 PM | 631KB |
- MCP39F501 Energy Metering & Power Monitoring Demo Board Software v2.2 ARD00455
- MCP39F501 Power Monitor Demo Board User's Guide ARD00455
- MCP39F501 Energy Metering & Power Monitoring Demo Board (ARD00455) BOM ARD00455
- MCP39F501 Energy Metering & Power Monitoring Demo Board (ARD00455) Gerbers ARD00455
- ARD00455
