KSZ9031

The KSZ9031 is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable.

The KSZ9031MNX offers the industry-standard GMII/MII (Gigabit Media Independent Interface/Media Independent Interface) for connection to GMII/MII MACs in Gigabit Ethernet processors and switches for data transfer at 1000Mbps or 10/100Mbps. The KSZ9031RNX provides the reduced gigabit media independent interface (RGMII).

The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core. The KSZ9031 offers diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9031 I/Os and the board. The LinkMD® TDR-based cable diagnostic identifies faulty copper cabling. Remote and local loopback functions verify analog and digital data paths.

The standard KSZ9031RNX is available in the 48-pin, lead-free QFN package, and the AEC-Q100 automotive qualified parts, KSZ9031RNXUA and KSZ9031RNXVA, are available in the 48-pin lead-free WQFN package. The KSZ9031MNX is available in a 64-pin, lead-free QFN package.

Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The  is subject to Microchip's  and requires a myMicrochip account.

产品特性
  • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver
  • KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
  • KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
  • GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
  • Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
  • On-chip termination resistors for the differential pairs
  • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
  • Jumbo frame support up to 16KB
  • 125MHz Reference Clock Output
  • Energy-detect power-down mode for reduced power consumption when the cable is not attached
  • Energy Efficient Ethernet (EEE) support with low-power idle (LPI) mode and clock stoppage for 100Base-TX/1000Base-T and transmit amplitude reduction with 10Base-Te option
  • Wake-on-LAN (WOL) support with robust custom-packet detection
  • AEC-Q100 qualified for automotive applications (KSZ9031RNXUA, KSZ9031RNXVA)
  • Programmable LED outputs for link, activity, and speed
  • Baseline wander correction
  • LinkMD® TDR-based cable diagnostic to identify faulty copper cabling
  • Parametric NAND tree support to detect faults between chip I/Os and board
  • Loopback modes for diagnostics
  • Automatic MDI/MDI-X crossover to detect and correct pair swap at all speeds of operation
  • Automatic detection and correction of pair swaps, pair skew, and pair polarity
  • MDC/MDIO management interface for PHY register configuration
  • Interrupt pin option
  • Power-down and power-saving modes
  • Operating voltages: Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V (external FET or regulator) VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V Transceiver (AVDDH): 3.3V or 2.5V (commercial temp)
  • Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V (external FET or regulator)
  • VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V
  • Transceiver (AVDDH): 3.3V or 2.5V (commercial temp)
  • Available in 48-pin QFN (7mm x 7mm) and 64-pin QFN (8mm x 8mm) packages
技术参数
Parameter Name Value Value
Description Gigabit Ethernet Transceiver with GMII/MII Support with Low Power Features Gigabit Ethernet Transceiver with GMII/MII Support with Low Power Features
Ethernet Bandwidth 10Base-T/ 100Base-TX/1000Base-T 10Base-T/ 100Base-TX/1000Base-T
Op. Voltage (V) 3.3 3.3
LEDs 2 2
# of Ethernet Ports 1 1
Interface MII/RGMII/GMII MII/RGMII/GMII
EEE Yes Yes
Temp. Range Min. (°C) -40 -40
Temp. Range Max. (°C) 105 105
HP-Auto MDIX Yes Yes
Wake-on-LAN Yes Yes
Cable Diags Yes Yes
Automotive Yes Yes
Interface1 MII, RGMII, GMII MII, RGMII, GMII
Supply Voltage (V) 3.3 3.3
Vdd I/O (V) 1.8/2.5/3.3 1.8/2.5/3.3
Cable Diagnostics Yes Yes
802.3az Yes Yes
Int Term Yes Yes
Supports EtherCAT Yes Yes
文档资料
KSZ9031MNX - Gigabit Ethernet Transceiver with GMII/MII SupportData Sheets05/24/20161287KB
KSZ9031RNX - Gigabit Ethernet Transceiver with RGMII SupportData Sheets05/24/20161277KB
KSZ9031MNX - Silicon Errata & Data Sheet ClarificationErrata04/13/2016415KB
KSZ9031RNX - Silicon Errata & Data Sheet ClarificationErrata04/13/2016616KB
AN2157 - Transient Protection in Power Over Ethernet ApplicationsAppNote05/24/2016229KB
Micrel AN 109 - Unmanaged Ethernet Redundant RingAppNote10/02/201567KB
Micrel AN 114 - Virtual LANAppNote10/02/201585KB
Micrel AN 24 - Ethernet over POFAppNote10/01/2015149KB
Micrel AN 25 - EtherSynch - Synchronization PerfectedAppNote10/01/2015267KB
Micrel AN 27 - Fast Ethernet: Delivery of Data in Industrial ApplicationsAppNote10/01/2015108KB
Micrel AN 31 - General PCB Design and Layout GuidelinesAppNote10/01/2015104KB
Micrel AN 32 - Get in Sync!AppNote10/01/20151432KB
Micrel AN 44 - Interfacing Fast Ethernet to ProcessorsAppNote10/01/2015149KB
Micrel AN 45 - Interfacing Fast Ethernet Transceivers to MAC ProcessorsAppNote10/01/2015122KB
Micrel AN 54 - KSZ9031 Gigabit PHY Optimized Power Scheme for High Efficiency, Low Power Consumption, and DissipationAppNote10/01/2015565KB
Micrel AN 8 - Capacitive Coupling Ethernet Transceivers without Using TransformersAppNote09/30/2015103KB
Micrel AN 81 - PHY Speed and Duplex ConfigurationAppNote10/02/2015132KB
Micrel AN 91 - Reducing Maintenance Costs With Cable Diagnosis and Micrels LinkMDAppNote10/02/2015420KB
Micrel ANLAN206 - KSZ9031 Gigabit PHY Optimized Power Scheme for High Efficiency, Low-Power Consumption and DissipationAppNote11/12/2015565KB
KSZ9031 IBISIBIS07/15/2016105KB
Driver is located in Linux KernelSoftware Library02/01/2016
KSZ9031MNX_v1.3_DP.zipDesign Guides02/19/20163651KB
KSZ9031RNX_v1.3_DP.zipDesign Guides02/19/20164217KB
订购型号
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
KSZ9031MNXCC64VQFN0C to +70CTRAY3.032.522.292.122.01
KSZ9031MNXCC-TR64VQFN0C to +70CT/R3.032.522.292.122.01
KSZ9031MNXIC64VQFN-40C to +85CTRAY3.633.032.752.542.41
KSZ9031MNXIC-TR64VQFN-40C to +85CT/R3.633.032.752.542.41
KSZ9031RNXCC48VQFN0C to +70CTRAY2.812.342.131.971.87
KSZ9031RNXCC-TR48VQFN0C to +70CT/R2.812.342.131.971.87
KSZ9031RNXIC48VQFN-40C to +85CTRAY3.713.092.812.602.46
KSZ9031RNXIC-TR48VQFN-40C to +85CT/R3.713.092.812.602.46
相关开发工具
器件无铅环保信息
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
KSZ9031MNXIC-TR0.1775000.78800064VQFN8x8x0.9mmMatte Tine3
KSZ9031MNXIA-TR0.1775000.78800064VQFN8x8x0.9mmMatte Tine3
KSZ9031RNXUA-TR0.1465000.72800048VQFN7x7x0.9mmMatte Tine3
KSZ9031MNXIC0.1775001.02692364VQFN8x8x0.9mmMatte Tine3
KSZ9031RNXIA-TR0.1295000.72800048VQFN7x7x0.9mmMatte Tine3
KSZ9031MNXCC0.1775001.02692364VQFN8x8x0.9mmMatte Tine3
KSZ9031RNXCC0.1295000.96153948VQFN7x7x0.9mmMatte Tine3
KSZ9031RNXIC-TR0.1295000.72800048VQFN7x7x0.9mmMatte Tine3
KSZ9031MNXCA0.1775001.02692364VQFN8x8x0.9mmMatte Tine3
KSZ9031RNXCC-TR0.1295000.72800048VQFN7x7x0.9mmMatte Tine3
KSZ9031MNXIA0.1775001.02692364VQFN8x8x0.9mmMatte Tine3
KSZ9031RNXVA0.1465000.96153948VQFN7x7x0.9mmMatte Tine3
KSZ9031RNXCA0.1295000.96153948VQFN7x7x0.9mmMatte Tine3
KSZ9031RNXIC0.1295000.96153948VQFN7x7x0.9mmMatte Tine3
KSZ9031MNXCA-TR0.1775000.78800064VQFN8x8x0.9mmMatte Tine3
KSZ9031RNXIA0.1295000.96153948VQFN7x7x0.9mmMatte Tine3
KSZ9031RNXUA0.1465000.96153948VQFN7x7x0.9mmMatte Tine3
KSZ9031RNXVA-TR0.1465000.72800048VQFN7x7x0.9mmMatte Tine3
KSZ9031RNXCA-TR0.1295000.72800048VQFN7x7x0.9mmMatte Tine3
KSZ9031MNXCC-TR0.1775000.78800064VQFN8x8x0.9mmMatte Tine3
KSZ9031MNX - Gigabit Ethernet Transceiver with GMII/MII Support KSZ9031
KSZ9031RNX - Gigabit Ethernet Transceiver with RGMII Support KSZ9031
KSZ9031MNX - Silicon Errata & Data Sheet Clarification KSZ9031
KSZ9031RNX - Silicon Errata & Data Sheet Clarification KSZ9031
AN2157 LAN9353
Micrel AN 109 KSZ8995
Micrel AN 114 KSZ8999
Micrel AN 24 KSZ8999
Micrel AN 25 KSZ8999
Micrel AN 27 KSZ8997
Micrel AN 31 KSZ8997
Micrel AN 32 KSZ8997
Micrel AN 44 KSZ8997
Micrel AN 45 KSZ8999
Micrel AN 54 KSZ9031
Micrel AN 8 KSZ8999
Micrel AN 81 KSZ8999
Micrel AN 91 KSZ8999
Micrel ANLAN206 KSZ9031
KSZ9031 IBIS KSZ9031
KSZ9031MNX_v1.3_DP.zip KSZ9031
KSZ9031RNX_v1.3_DP.zip KSZ9031
Products 产品服务
Manufacturers 生产厂家
联系购买Sales
©1993 - 2024 BDTIC