LAN8187 _ BDTIC 中国领先电子元器件代理商

LAN8187

Please consider this device

The Microchip LAN8187/LAN8187i is a low-power industrial temperature (LAN8187i), variable I/O voltage, analog interface IC with HP Auto-MDIX for high-performance embedded Ethernet applications. The LAN8187/LAN8187i can be configured to operate on a single 3.3V supply utilizing an integrated 3.3V to 1.8V linear regulator. An option is available to disable the linear regulator to optimize system designs that have a 1.8V power plane available.

The LAN8187/LAN8187i consists of an encoder/decoder, scrambler/descrambler, wave-shaping transmitter, output driver, twisted-pair receiver with adaptive equalizer and baseline wander (BLW) correction, and clock and data recovery functions. The LAN8187/LAN8187i can be configured to support either the Media Independent Interface (MII) or the Reduced Media Independent Interface (RMII).

The LAN8187/LAN8187i is compliant with IEEE 802.3-2005 standards (MII Pins tolerant to 3.6V) and supports both IEEE 802.3-2005 compliant and vendor-specific register functions. It contains a full-duplex 10-BASE-T/100BASE-TX transceiver and supports 10-Mbps (10BASE-T) operation on Category 3 and Category 5 unshielded twisted-pair cable, and 100-Mbps (100BASE-TX) operation on Category 5 unshielded twisted-pair cable.

产品特性

Single-Chip Ethernet Physical Layer Transceiver (PHY)
ESD Protection levels of ±8kV HBM without external protection devices
ESD protection levels of IEC61000-4-2, ±8kV contact mode, and ±15kV for air discharge mode per independent test facility
Comprehensive flexPWR® Technology Flexible Power Management Architecture
Flexible Power Management Architecture
LVCMOS Variable I/O voltage range: +1.6V to +3.6V
Integrated 3.3V to 1.8V regulator for optional single supply operation Regulator can be disabled if 1.8V system supply is available
Regulator can be disabled if 1.8V system supply is available
Performs HP Auto-MDIX in accordance with IEEE 802.3ab specification
Automatic Polarity Correction
Latch-Up Performance Exceeds 150mA per EIA/JESD 78, Class II
Energy Detect power-down mode
Low Current consumption power-down mode
Low operating current consumption: 39mA typical in 10BASE-T and 79mA typical in 100BASE-TX mode
39mA typical in 10BASE-T and
79mA typical in 100BASE-TX mode
Supports Auto-negotiation and Parallel Detection
Supports the Media Independent Interface (MII) and Reduced Media Independent Interface (RMII)
Compliant with IEEE 802.3-2005 standards MII Pins tolerant to 3.6V
MII Pins tolerant to 3.6V
IEEE 802.3-2005 compliant register functions
Integrated DSP with Adaptive Equalizer
Baseline Wander (BLW) Correction
Vendor Specific register functions
Low profile 64-pin TQFP RoHS compliant package (10 x 10 x 1.4mm)
4 LED status indicators
Commercial Operating Temperature 0° C to 70° C
Industrial Operating Temperature -40° C to 85° C version available (LAN8187i)
Set-Top Boxes
Network Printers and Servers
LAN on Motherboard
10/100 PCMCIA/CardBus Applications
Embedded Telecom Applications
Video Record/Playback Systems
Cable Modems/Routers
DSL Modems/Routers
Digital Video Recorders
Personal Video Recorders
IP and Video Phones
Wireless Access Points
Digital Televisions
Digital Media Adaptors/Servers
POS Terminals
Automotive Networking
Gaming Consoles
Security Systems
Access Control

技术参数

Parameter Name Value	Value
Description MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX & flexPWR® Technology	MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX & flexPWR® Technology
Ethernet Bandwidth 10Base-T/ 100Base-TX	10Base-T/ 100Base-TX
Op. Voltage (V) 3.3	3.3
LEDs 4	4
# of Ethernet Ports 1	1
Interface MII/RMII	MII/RMII
Temp. Range Min. (°C) -40	-40
Temp. Range Max. (°C) 85	85
HP-Auto MDIX Yes	Yes
Interface1 MII/RMII	MII/RMII
Supply Voltage (V) 3.3	3.3
Vdd I/O (V) 3.3	3.3

文档资料

LAN8187/LAN8187i +/-15kV ESD Protected MII/RMII 10/100 Ethernet Transceiver wit	Data Sheets	03/04/2011	941KB
AN13.18 - Scalable 10/100 Ethernet Reference Design to Support Migration from LAN83C185 Non Auto-MDIX PHY to LAN8187 HP Auto-MDIX PHY	AppNote	06/18/2008	176KB
AN17.18 - SMSC Design Guide for Power over Ethernet Applications	AppNote	09/20/2009	445KB
AN18.6 - SMSC Ethernet Physical Layer Layout Guidelines	AppNote	10/28/2008	578KB
AN2157 - Transient Protection in Power Over Ethernet Applications	AppNote	05/24/2016	229KB
AN8.13 - Suggested Magnetics	AppNote	06/28/2011	240KB
LAN8187(i) IBIS Model	IBIS	12/07/2006	494KB
LAN8187 Schematic Checklist	Design Checklist	08/24/2013	1KB
LAN8187 TQFP Rev E Schematic Checklist	Design Checklist	02/16/2012	78KB