PCA9704PW: 18 V tolerant SPI 8-bit GPI with maskable INT
The PCA9704 is a low power 18 V tolerant SPI General Purpose Input (GPI) shift register
designed to monitor the status of switch inputs. It generates an interrupt when one or
more of the switch inputs change state but allows selected inputs to not generate
interrupts using the interrupt masking feature. The input level is recognized as a HIGH
when it is greater than 0.8 x VDD and as a LOW when it is less than 0.55 x
VDD (minimum LOW threshold of 2.5 V at 5 V node). The PCA9704 can monitor
up to 8 switch inputs.
The falling edge of the CS pin samples the input port
status and clears the interrupt. When CS is LOW, the
rising edge of the SCLK loads the shift register and shifts the value out of the shift
register. The serial input is sampled on the falling edge of SCLK. The contents of the
shift register are loaded into the interrupt mask register of the device on the rising
edge of CS.
Each of the input ports has a 18 V breakdown ESD protection circuit, which dumps the
ESD/overvoltage current to ground. When used with a series resistor (minimum 100 kΩ),
the input can connect to a 12 V battery and support double battery, reverse battery, 27
V jump start and 40 V load dump conditions in automotive applications. Higher voltages
can be tolerated on the inputs depending on the series resistor used to limit the input
current.
The INT_EN pin is used to both enable the GPI pins and to enable the INT output pin to minimize battery drain in cyclically
supplied pull-up or pull-down applications. The SDIN pull-down prevents floating nodes
when the device is used in daisy-chain applications.
With both the high breakdown voltage and high ESD, this device is useful for both
automotive (AEC-Q100 compliance available) and mobile applications.
Outline 3d SOT403-1
数据手册 (1)
封装信息 (1)
包装 (1)
支持信息 (1)
订购信息
| 型号 | 状态 | Package name | Package version |
|---|
| PCA9704PW/Q900 | Active | | |
| PCA9704PW | Active | TSSOP16 | SOT403-1 |
封装环保信息
