PN7120A0EV: Full NFC Forum-compliant controller with integrated firmware and NCI interface
PN7120, the best plug'n play full NFC solution - easy integration into any OS environment, with integrated firmware and NCI interface designed for contactless communication at 13.56 MHz.
It is the ideal solution for rapidly integrating NFC technology in any application, especially those running OS environment like Linux and Android, reducing Bill of Material (BOM) size and cost, thanks to:
PN7120 embeds a new generation RF contactless front-end supporting various transmission modes according to NFCIP-1 and NFCIP-2, ISO/IEC14443, ISO/IEC 15693, ISO/IEC 18000-3, MIFARE® and FeliCa specifications. It embeds an ARM Cortex-M0 microcontroller core loaded with the integrated firmware supporting the NCI 1.0 host communication.
The contactless front-end design brings a major performance step-up with on one hand a higher sensitivity and on the other hand the capability to work in active load modulation communication enabling the support of small antenna form factor.
For contactless card functionality, the PN7120 can act autonomously if previously configured by the host in such a manner.
PN7120 integrated firmware provides an easy integration and validation cycle as all the NFC real-time constraints, protocols and device discovery (polling loop) are being taken care internally. In few NCI commands, host SW can configure the PN7120 to notify for card or peer detection and start communicating with them.
PN7120 block diagram
Full NFC Forum-compliant controller with integrated firmware and NCI interface
最佳的即插即用完整NFC解决方案
数据手册 (1)
| 名称/描述 | Modified Date |
|---|---|
| Full NFC Forum-compliant controller with integrated firmware and NCI interface (REV 3.2) PDF (2.0 MB) PN7120 [English] | 04 Jul 2016 |
应用说明 (11)
| 名称/描述 | Modified Date |
|---|---|
| PN7120 Arduino SBC Kit Quick Start Guide (REV 1.2) PDF (752.0 kB) AN11844 [English] | 01 Sep 2016 |
| NXP-NCI Android Porting Guidelines (REV 1.2) PDF (505.0 kB) AN11690 [English] | 31 Aug 2016 |
| PN7120 Product Quick Start Guide (REV 1.4) PDF (86.0 kB) AN11700 [English] | 31 Aug 2016 |
| NXP-NCI Kinetis Design Studio example (REV 1.3) PDF (504.0 kB) AN11845 [English] | 31 Aug 2016 |
| NXP®-NCI LPCXpresso example (REV 1.4) PDF (594.0 kB) AN11658 [English] | 12 Jul 2016 |
| PN71x0 Linux Software Stack Integration Guidelines (REV 2.2) PDF (308.0 kB) AN11697 [English] | 12 Jul 2016 |
| PN71x0 Windows IoT Porting Guidelines (REV 1.1) PDF (265.0 kB) AN11767 [English] | 07 Jun 2016 |
| PN7120 Antenna Design and Matching Guide (REV 1.1) PDF (1.2 MB) AN11564 [English] | 03 May 2016 |
| PN7120 Hardware Design Guide (REV 1.1) PDF (590.0 kB) AN11565 [English] | 22 Oct 2015 |
| How to build a NFC Application on Android (REV 1.1) PDF (503.0 kB) AN11367 [English] | 28 Sep 2015 |
| PN7120 Low Power Mode Configuration (REV 1.0) PDF (372.0 kB) AN11562 [English] | 16 Jun 2015 |
用户指南 (3)
| 名称/描述 | Modified Date |
|---|---|
| PN7120 NFC Controller SBC Kit User Manual (REV 1.3) PDF (874.0 kB) UM10878 [English] | 12 Jul 2016 |
| PN7120 NFC Controller Arduino SBC Kit User Manual (REV 1.1) PDF (734.0 kB) UM11008 [English] | 12 Jul 2016 |
| PN7120 User Manual (REV 1.1) PDF (1.5 MB) UM10819_1 [English] | 30 May 2016 |
手册 (1)
| 名称/描述 | Modified Date |
|---|---|
| Full NFC Forum-compliant controller family with integrated FW and NCI interface (REV 1.0) PDF (206.0 kB) PN71XXLF-1 [English] | 22 Jun 2016 |
封装信息 (1)
| 名称/描述 | Modified Date |
|---|---|
| plastic very thin fine-pitch ball grid array package; 49 balls (REV 1.1) PDF (179.0 kB) SOT1320-1 [English] | 15 Jun 2016 |
包装 (1)
| 名称/描述 | Modified Date |
|---|---|
| VFBGA; Reel dry pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,518 or... (REV 1.0) PDF (238.0 kB) SOT1320-1_518 [English] | 12 Jun 2014 |
软件
- PN71x0 on RPI winIoT driver installation files (REV 1.1) ZIP PN71x0 on RPI winIoT driver installation files 5/30/2016
订购信息
| 型号 | 状态 | Supported RF standards | RF Output Power [max] | RF driver current [max] (mA) | RF driver supply (V) | Contact Interface | Programmable microcrontroller | Host Interface |
|---|---|---|---|---|---|---|---|---|
| PN7120A0EV/C10801 | Active | ISO/IEC 14443A; PICC and PCDISO/IEC 14443B; PICC and PCDISO/IEC 18092; NFC-IP1ISO/IEC 21481; NFC-IP2MIFARE CLASSIC | 450mW | 180.0 | N | N | I2C, NCI protocol |
封装环保信息
| 产品编号 | 封装说明 | Outline Version | 回流/波峰焊接 | 包装 | 产品状态 | 部件编号订购码 (12NC) | Marking | 化学成分 | RoHS / 无铅 / RHF | 无铅转换日期 | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PN7120A0EV/C10801 | | SOT1320-1 | Tray, Bakeable, Single in Drypack | Active | PN7120A0EV/C10801E (9353 056 17551) | Standard Marking | PN7120A0EV/C10801 |    | Always Pb-free | NA | 3 | |
| Reel 13" Q1/T1 in Drypack | Active | PN7120A0EV/C10801Y (9353 056 17518) | Standard Marking | PN7120A0EV/C10801 | | Always Pb-free | NA | 3 |
- Full NFC Forum-compliant controller with integrated firmware and NCI interface nfc_controller_solutions
- PN7120 Arduino SBC Kit Quick Start Guide pn7120
- NXP-NCI Android Porting Guidelines pn7150b0hn
- PN7120 Product Quick Start Guide pn7120
- NXP-NCI Kinetis Design Studio example pn7150b0hn
- NXP®-NCI LPCXpresso example pn7150b0hn
- PN71x0 Linux Software Stack Integration Guidelines pn7150b0hn
- PN71x0 Windows IoT Porting Guidelines pn7150b0hn
- PN7120 Antenna Design and Matching Guide pn7120
- PN7120 Hardware Design Guide pn7120
- How to build a NFC Application on Android pn7120
- PN7120 Low Power Mode Configuration pn7120
- PN7120 NFC Controller SBC Kit User Manual pn7120
- PN7120 NFC Controller Arduino SBC Kit User Manual pn7120
- PN7120 User Manual pn7120
- Full NFC Forum-compliant controller family with integrated FW and NCI interface pn7150b0hn
- PN71x0 on RPI winIoT driver installation files PN7150B0HN
- plastic very thin fine-pitch ball grid array package; 49 balls pn7120
- VFBGA; Reel dry pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,518 or... pn7120
- PN7120A0EV
