TEA1905TK: USB-PD type C controller for SMPS
The TEA1905 is a USB Power Delivery (USB-PD) type-C and other proprietary protocol (Quick Charge) controller with a high integration level and near fully digital bare minimum of external components. The TEA1905 USB-PD controller drives an NMOS load switch. It achieves a very high power density Switching Mode Power Supply (SMPS) with an ultra-high efficiency over the entire load range. When applied in combination with the NXP® Semiconductors primary controller, TEA1936T, it meets the CoC Tier-2, EuP lot 6, and DOE v6 energy efficiency requirement specifications.
In addition to the power control and required protections, the TEA1905 incorporates the full feature set of the type C USB-PD protocol that is required for an AC-to-DC SMPS adapter.
The SW pin is used to drive an external load switch (NMOS), which enables/disables the power over Vbus. When the output voltage is reduced or the type-C cable is detached, the DISCH pin ensures that the output voltage discharges in a controlled way to the voltage level required by the USB-PD protocol.
The TEA1905 incorporates all required protections, like OverTemperature Protection (OTP), adaptive OverVoltage Protection (OVP), Short Circuit Protection (SCP), and UnderVoltage LockOut (UVLO) protection.
- High integration level (only requires an external line switch and SR diode or controller)
- NMOS load switch without external winding
- Fault handling at secondary side without second optocoupler
- Low-cost SO14 package (suitable for both reflow soldering and wave soldering) or leadless HVSON16 package for smaller size (reflow only)
- Low-cost Bill Of Materials (BOM; ≈15 external components)
- Very low no-load power (< 25 mW for the complete system solution)
- High power density
- Ultra-high efficiency
订购信息
| 型号 | 状态 | Package name | Package version | Topology | fosc (kHz) | fosc peak (kHz) | fosc high (kHz) | fosc medium (kHz) | fburst (kHz) | VCC [max] (V) | Softstart | 特性 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEA1905TK/1 | Introduction Pending | HVSON16 |
封装环保信息
| 产品编号 | 封装说明 | Outline Version | 回流/波峰焊接 | 包装 | 产品状态 | 部件编号订购码 (12NC) | Marking | 化学成分 | RoHS / 无铅 / RHF | 无铅转换日期 | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEA1905TK/1 |  | Reel 13" Q1/T1 | Development | TEA1905TK/1J (9353 082 11118) | Standard Marking |    | Always Pb-free | 1 | 1 |
