特性和优势

• Supports implementation of various system PD roles: P, P/C, C, C/P
• Supports Type-C role configurability
  • Type-C role (DFP, UFP, DRP) is Non-Volatile Memory (NVM) and register programmable based on OEM platform requirements
  • Implements Type-C Connection State machines for various Type-C roles
  • Implements UFP role pull down behavior to handle dead battery condition on battery powered platforms
  • Supports register programmable and variable ‘Rp’ indication (for DRP/DFP usage and accessory detection)
  • Implements 'Rd' indication on CC pin (for Device side implementation)
• Type-C role (DFP, UFP, DRP) is Non-Volatile Memory (NVM) and register programmable based on OEM platform requirements
• Implements Type-C Connection State machines for various Type-C roles
• Implements UFP role pull down behavior to handle dead battery condition on battery powered platforms
• Supports register programmable and variable ‘Rp’ indication (for DRP/DFP usage and accessory detection)
• Implements 'Rd' indication on CC pin (for Device side implementation)
• Operates autonomously to support usage without a PD Policy control or Alternate mode control MCU
  • CC detection/indication scheme based on Type-C role
  • Cable/plug connect and disconnect handling (Connection State machines) under various Type-C roles
  • Indication of orientation detection via CC_ORIENT pin and status register(s)
  • Debug and Audio Accessory detection and indication in status register(s)
• CC detection/indication scheme based on Type-C role
• Cable/plug connect and disconnect handling (Connection State machines) under various Type-C roles
• Indication of orientation detection via CC_ORIENT pin and status register(s)
• Debug and Audio Accessory detection and indication in status register(s)
• Cooperatively works under the control of Policy controller MCU for power delivery negotiation and contract(s), Alternate mode and VDM exchanges
  • Implements BMC (de)coding, 4B5B symbol (de)coding, CRC generation/checking, PD packet assembling/disassembling including Preamble, SOP, EOP, Good CRC response, Retries, Hard and Cable resets
  • PD PHY and Protocol layer interface control and status update handled via SPI/I²C interface
• Implements BMC (de)coding, 4B5B symbol (de)coding, CRC generation/checking, PD packet assembling/disassembling including Preamble, SOP, EOP, Good CRC response, Retries, Hard and Cable resets
• PD PHY and Protocol layer interface control and status update handled via SPI/I²C interface
• SOP Configurability
  • Register programmable to generate and receive SOP, SOP', SOP'-debug, SOP", SOP"-debug'' in DFP/DRP (host use case)
  • Register programmable to receive and respond on SOP, SOP'-debug and SOP"-debug commands
• Register programmable to generate and receive SOP, SOP', SOP'-debug, SOP", SOP"-debug'' in DFP/DRP (host use case)
• Register programmable to receive and respond on SOP, SOP'-debug and SOP"-debug commands
• Supports low RON VCONN switch with enable/disable (Hi-Z) support
  • Capable of maximum current delivery of 1 A over 2.7 V to -5.5 V
  • Supports register programmable Forward current protection control
  • Supports register programmable reverse current protection
• Capable of maximum current delivery of 1 A over 2.7 V to -5.5 V
• Supports register programmable Forward current protection control
• Supports register programmable reverse current protection
• Back current protection on all pins when PTN5100 is unpowered
• CC1 and CC2 pins are 5.5 V tolerant
• VBUS pin and VBUS power path MOSFET enable pins are 28 V tolerant
• Delivers (active LOW enable) gate control signals for PMOS Power MOSFETs on VBUS source and sink power paths
• Provides dedicated IO pin (CC_ORIENT) for indicating Cable/plug orientation and IO pin (DBGACC_FOUND) for indicating Debug accessory detection
• Delivers up to 30 mA (max) for powering Policy controller MCU
• Supports SPI slave interface (SPI modes 0 and 3 supported) up to 30 MHz
• Supports I²C slave interface standard mode (100 kHz), Fast mode (400 kHz) and Fast mode plus (1 MHz)
• I²C Device slave address programmable up to 3 values
• Supports 3.3 V or 1.8 V capable I²C-bus or SPI interface
  • Supports register access - device configuration, control and status/interrupt interfacing through Slave I²C-bus interface
• Supports register access - device configuration, control and status/interrupt interfacing through Slave I²C-bus interface
• Power supplies - VDD (3.3 V ±10%) or VBUS
  • Tolerant up to 28 V on VBUS and operational up to maximum of 25 V on VBUS
• Tolerant up to 28 V on VBUS and operational up to maximum of 25 V on VBUS
• Operating temperature -20 °C to 105 °C
• ESD 8 kV HBM, 1 kV CDM
• Package: HVQFN20 4 mm x 4 mm, 0.5 mm pitch

应用

• PC platforms: Notebook PCs, Desktop PCs, Ultrabooks, Chromebooks
• Tablets, 2:1 Convertibles, Smartphones and Portable devices
• PC accessories/peripherals: Docking, Mobile Monitors, Multi-Function Monitors, Portable/External hard drives, Cable adaptors, Dongles and accessories, etc.

产品图片