LB11697V: Direct PWM Drive Brushless Motor Predriver
The LB11697V is a direct PWM drive predriver IC designed for three-phase power brushless motors. A motor driver circuit with the desired output power (voltage and current) can be implemented by adding discrete transistors in the output circuits. Furthermore, the LB11697V provides a full complement of protection circuits allowing it to easily implement high-reliability drive circuits. Note that the LB11697V is a modified version of the LB11696V in which the output logic has been optimized for 12 V system motors. This allows the number of external components to be reduced in application circuits.
特性- Three-phase bipolar drive
- Direct PWM drive (controlled either by control voltage or PWM variable duty pulse input)
- Built-in forward/reverse switching circuit
- Start/stop mode switching circuit (stop mode power saving function)
- Built-in input amplifier
- 5 V regulator output (VREG pin)
- Current limiter circuit (Supports 0.25 V (typical) reference voltage sensing based high-precision detection)
- Undervoltage protection circuit (The operating voltage can be set with a zener diode)
- Automatic recovery type constraint protection circuit with protection operating state discrimination output (RD pin)
- Four types of Hall signal pulse outputs
- Supports thermistor based thermal protection of the output transistors
|
数据表 (1)
封装图纸 (1)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| LB11697V-MPB-E | Last Shipments | Pb-free | SSOP-30 | 565AT | 3 | Fan-Fold | 48 | |
| LB11697V-TLM-E | Active | Pb-free | SSOP-30 | 565AT | 3 | Tape and Reel | 1000 | $1.656 |
订购产品技术参数
| Product | Phase | VM Min (V) | VM Max (V) | VCC Min (V) | VCC Max (V) | IO Max (A) | IO Peak Max (A) | Control Type | Current Sense | Regulator Output | Fault Detection |
|---|
| LB11697V-TLM-E | 3 | | | 8 | 18 | 0.03 | | PWM | External Resistor | Yes | Over-Current |
