MC100E016: ECL 8-Bit Up Synchronous Binary Counter _ BDTIC 中国领先电子元器件代理商

MC100E016: ECL 8-Bit Up Synchronous Binary Counter

The MC10E/100E016 is a high-speed synchronous, presettable, cascadable 8-bit binary counter. Architecture and operation are the same as the MC10H016 in the MECL 10H family, extended to 8-bits, as shown in the logic symbol. The counter features internal feedback of TCbar, gated by the TCLD (terminal count load) pin. When TCLD is LOW (or left open, in which case it is pulled LOW by the internal pull-downs), the TCbar feedback is disabled, and counting proceeds continuously, with TCbar going LOW to indicate an all-one state. When TCLD is HIGH, the TC feedback causes the counter to automatically reload upon TCbar = LOW, thus functioning as a programmable counter. The Qn outputs do not need to be terminated for the count function to operate properly. To minimize noise and power, unused Q outputs should be left unterminated.The 100 series contains temperature compensation.

特性

700MHz Min. Count Frequency
1000ps CLK to Q, TCbar
Internal TCbar Feedback (Gated)
8-Bit
Fully Synchronous Counting and TCbar Generation
Asynchronous Master Reset
PECL Mode Operating Range: VCC= 4.2 V to 5.7 V with VEE = 0 V
NECL Mode Operating Range: VCC= 0 V with VEE = -4.2 V to -5.7 V
Internal Input Pulldown Resistors
ESD Protection: > 2 kV HBM, > 200 V MM
Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
Moisture Sensitivity Level 1 For Additional Information, see Application Note AND8003/D
Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
Transistor Count = 592 devices
Pb-Free Packages are Available

封装

应用注释 (17)

Document Title	Document ID/Size	Revision	Revision Date
AC Characteristics of ECL Devices	AND8090/D (896.0kB)	1
Clock Management Design Using Low Skew and Low Jitter Devices	TND301/D (205.0kB)	0
Designing with PECL (ECL at +5.0 V)	AN1406/D (105.0kB)	2
ECL Clock Distribution Techniques	AN1405/D (54.0kB)	1
ECLinPS and ECLinPS Lite SPICE I/O Modeling Kit	AN1503/D (120.0kB)	6
ECLinPS™ Circuit Performance at Non-Standard VIH Levels	AN1404/D (51.0kB)	1
ECLinPS, ECLinPS Lite, ECLinPS Plus and GigaComm Marking and Ordering Information Guide	AND8002 (71kB)	12
Interfacing Between LVDS and ECL	AN1568/D (121.0kB)	11
Interfacing with ECLinPS	AND8066/D (72kB)	3
Metastability and the ECLinPS Family	AN1504/D (103.0kB)	3
Odd Number Divide By Counters with 50% Outputs and Synchronous Clocks	AND8001/D (90.0kB)	0
Phase Lock Loop General Operations	AND8040/D (64.0kB)	3
Storage and Handling of Drypack Surface Mount Device	AND8003/D (49kB)	2	Mar, 2016
Termination of ECL Logic Devices	AND8020/D (176.0kB)	6
The ECL Translator Guide	AN1672/D (142.0kB)	12
Thermal Analysis and Reliability of WIRE BONDED ECL	AND8072/D (119.0kB)	5
Using Wire-OR Ties in ECLInPS™ Designs	AN1650/D (1130.0kB)	3