ST485AB：very high speed low power RS-485/RS-422 transceiver, [-40oC, 85oC] temperature range
The ST485A is a low power, high speed transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration. The ST485A draws 3 mA (typ.) of supply current when unloaded or fully loaded with disabled drivers. It operates from a single 5 V supply.
Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that place the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic high output if both inputs are open circuit.
The ST485A is designed for bi-directional data communications or multipoint bus transmission lines.
Key Features
- Latch-up free up to 500 mA
- Current limiting and thermal shutdown for driver overload protection
- Operate from single 5 supply
- 70mV typical input hysteresis
- Low supply current: 5 mA max
- Designed for RS 485 interface applications
- High data rate > 30 Mbps
- Driver maintains high impedance in 3-state or with the power off
- ±4 kV ESD protection
- -7 to 12 common mode input voltage range
产品规格
应用手册
手册
样片和购买
| 型号 | Package | Packing Type | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | Autoshutdown | Unit Price (US$)
* | Quantity | ECCN (EU) | ECCN (US) | Country of Origin |
|---|
| ST485ABDR | SO-8 | Tape And Reel | -40 | 85 | - | 0.82 | 1000 | NEC | EAR99 | CHINA |
质量和可靠性
| 型号 | Package | Grade | RoHS Compliance Grade | Material Declaration** |
|---|
| ST485ABDR | SO-8 | Industrial | Ecopack3 | |
