• 简体中文
• English

STEVAL-ILL044V1：9 W Triac dimmable, high power factor, isolated LED driver based on the HVLED815PF (for US market)

The STEVAL-ILL044V1 demonstration board showcases ST’s new LED driver chip, HVLED815PF. It solves the problem of low-cost drive circuitry for LED replacements for 40 W incandescent or equivalent compact-fluorescent lamps.

The HVLED815PF is a new integrated power controller using primary-side control to achieve LED current regulation within +/-5%. (It also has primary-side voltage regulation, used here for open load protection).

The device incorporates an 800 V avalanche-rated FET and fits in a standard SO-16 package. An internal startup circuit eliminates the need for external rapid-start circuitry.

The PFC-flyback power converter operates in transition mode for the highest efficiency and best use of components. With the addition of a few extra components the HVLED815PF is made to draw near-sinusoidal input current from the AC line. The circuit regulates LED current over a wide range of line voltage and LED string voltage, and is dimmable with standard Triac-based dimmers.

Key Features

• +/- 5% primary-side current regulation, no optocoupler
• Fully isolated output
• Low component count
• Only 1 tight-tolerance component
• High efficiency, >86%
• High power factor >0.98
• Low THD, < 20% over 90 V to 132 V range
• Fits in 28 mm tubing
• 9 W output, for light equal to range from 40 W to 60 W incandescent
• Startup within 0.2 seconds
• Dimmable over 90 V to 132 V voltage range
• RoHS compliant

产品规格

应用手册

Board Manufacturing Specifications

Bill of Materials

Schematic Packs

宣传册

许可协议

样片和购买

质量和可靠性