/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
* File Name          : readme.txt
* Author             : MCD Application Team
* Version            : V2.0
* Date               : 12/06/2007
* Description        : This sub-directory contains all the user-modifiable files
*                      working with IAR Embedded Workbench for ARM software
*                      toolchain (version 4.30A and Later)
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Directory contents
===================
- SLOW.ewd/.eww/.ewp: A pre-configured project file with the provided AN
                      that produces a debug\release executable image with IAR 
                      Embedded Workbench.

- 71x_init.s: This module performs RAM remapping (if required), Initializes stack
              pointers and interrupts for each mode and finally branches to "main" 
              in the C library (which eventually calls main()).

- 71x_vect.s: This file contains exception vectors and exception handlers.
              It is written in assembler and initializes the exception vectors.

- lnkarm_flash.xcl: This file is the IAR specific linking and loading file used 
                    to load in Flash and execute code and variables to target 
                    memories and regions. You can customize this file to your need.

- lnkarm_ram.xcl: This file is the IAR specific linking and loading file used to 
                  load in RAM and execute code and variables to target memories 
                  and regions. You can customize this file to your need.

Note
====
The files listed above should be only used with IAR Embedded Workbench for ARM 
software toolchain.

How to use it
=============
- Open the SLOW.eww workspace.
- Rebuild all files: Project->Rebuild all
- load project image: Project -> Debug(ctrl+D)
- Run program:Debug->Go(F5)


******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE******
