/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Date First Issued  : 05/18/2006 : Version 1.0
* Description        : This sub-directory contains all the user-modifiable files 
*                      needed to create a new project linked with the STR91x 
*                      library and working with RIDE software toolchain (version 
*                      746 P1-P2 and Later)
********************************************************************************
* History:
* 05/22/2007 : Version 1.2
* 05/24/2006 : Version 1.1
* 05/18/2006 : Version 1.0
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Directory contents
===================
- project.prj/.dbi:A pre-configured project file with the provided library 
                   structure that produces a debug  executable image with RIDE 
                   toolchain.              

- 91x_init.s: This module initializes the exception vectors, stack pointers,
              RAM size (96K) ,CP15 registers and finally branches to "main" in 
              the C library (which eventually calls main()).
              It offers also the ability to select the clock source frequency to 
              be OSC, RTC or PLL (@96Mhz by default). 
              
Note:
====
 When booting from Bank 1, use OSC as the default clock source . 
 If you want to run  CPU @ 66 MHz or higher, PLL configuration might
 be done out in C code and the  Flash wait states configuration should be 
 executed from SRAM  to avoid read while writing in same bank.              
              
How to use it
=============
In order to make the program work, you must do the following:

- double click on Project.prj file.
- load project image: Debug -> Start Project.elf(ctrl+D)
- Run program: Debug->Run(Ctrl + F9)


******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE******
