
REV 1.0		24062011
- First customer release version
	
REV 1.1		12/07/2011
- Tag Detection  parameters modified
- Header modification for transparent commands "01" mandatory
- Label modification for CR95HFDll_Sendreceive -> CR95HFDll_SendRecv
- iso15693 config modification -> High data rate 10%
	
REV 1.1.1	20/10/2011
- CR95HF.dll revision 0.5 added 
	
REV 1.2		04/01/2012
-	CR95HF.dll revision 0.6 : Function to check DEMO-CR95HF USB connection added
-	Software improved to check USB connection and reconnect DEMO-CR95HF in case of USB problems (protocol select automatically send again).
-	Iso15693 : 
o	M24LR04E added
o	M24LR64E added
-	Iso14443-A added
o	Standard command added
o	Anticollision function included
-	Iso14443-B 
o	REQB & WUPB added
o	Anticollision function included
-	User interface
o	Read register modified (datasheet)
o	Write regsister command added
o	Idle parameters modified & AN3433 referenced
-	Tag Detection tool
o	Calibration parameters modified
o	With/Without read register command option added
o	Tag Detection routine can detect iso15693 tags/iso14443-A cards/iso14443-B tags/iso14443-B cards/Felica cards
-	Tool box 
o	DEMO-CR95HF-A USB Handle check command added
o	DEMO-CR95HF-A USB connect command added
o	Get Interface pin state command added
o	Reset SPI command added
o	Polig+ Reading command added
-	Script tool
o	DEMO-CR95HF-A USB Handle check command added
o	DEMO-CR95HF-A USB connect command added

REV 1.3		09/05/2012		
- IDn display moficifation
- Dll 0.8 added (continus improvememnt + Dll 0.8 .h .lib files available )
- cr95hf command : 
o Write register : Set/Reset HFO to RF added
- iso15693 : 
o Read Multiple Block modified to be able to read all memory (internal management)
o Get SSS : idem 
- iso14443-A
o protocol select procedure improved (confifuration, Modulation depth & gain)
o Topaz product added
- iso14443-A
o protocol select procedure improved (confifuration, Modulation depth & gain)
o AttriB command added
- iso8092 added
o ReqC added
- DEMO-CR95HF tool box
o possibility to change Register parameters for iso14443-A protocol
o send any ST_CMD request added
- Tag Detection
o User interface improved
o Possibility to launch tag detection on all/some rf protocols
o Timing process improved
- Auto Detect tool (New)
o possibility to launch inventory procedure for all/some rf protocol
o several loops available
