/**
  @page ewarm EWARM Fractal Project for STM32F4xx devices
  
  @verbatim
  ******************** (C) COPYRIGHT 2012 STMicroelectronics *******************
  * @file    readme.txt
  * @author  MCD Application Team
  * @version V1.0.1
  * @date    22-March-2012
  * @brief   This sub-directory contains all the user-modifiable files needed to
  *          create a new project linked with the STM32F4xx Standard Peripherals 
  *          Library and working with IAR Embedded Workbench for ARM (EWARM)
  *          software toolchain (version 6.30 and later).
  ******************************************************************************
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the Licens
  *   
  ******************************************************************************
   @endverbatim


 
 @par Directory contents

 - project .ewd/.eww/.ewp: A pre-configured project file with the provided library 
                           structure that produces an executable image with IAR 
                           Embedded Workbench.
                
 - stm32f4xx_flash.icf : This file is the IAR Linker configuration file used to 
                         place program code (readonly) in internal FLASH and data
                         (readwrite, Stack and Heap)in internal SRAM. 
                         You can customize this file to your need.                                                                                
                                
 - stm32f4xx_sram.icf:  This file is the IAR Linker configuration file used to 
                       place program code (readonly) and data (readwrite, Stack 
                       and Heap)in internal SRAM. 
                       You can customize this file to your need.                    
                             
 @par How to use it ?

 - Open the Project.eww workspace.
 - Rebuild all files: Project->Rebuild All
 - Load project image: Project->Download and Debug
 - Run program: Debug->Go(F5)

 @note The needed define symbols for this config are already declared in the
       preprocessor section: USE_STM324xG_EVAL, STM32F4XX, USE_STDPERIPH_DRIVER 

 * <h3><center>&copy; COPYRIGHT STMicroelectronics</center></h3>
 */

