/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Version            : V4.0
* Date               : 10/09/2007
* Description        : Description of the RTC Example.
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================
This example demonstrates how to configure the RTC in order to generate an IRQ 
every second using the RTC second interrupt. In the RTC ISR the led connected 
to Port 0 pins (LD3, LD4, LD5 and LD6 mopunted on mb393) are toggling every 1s.


Directory contents
==================
 71x_conf.h  Library Configuration file
 71x_it.c    Interrupt handlers
 71x_it.h    Interrupt handlers header file
 main.c      Main program

Hardware environment
====================
This example works as standalone on the STR7-Eval board (mb393) and extra 
hardware implementation is not required to run the example.


How to use it
=============
In order to make the program work, you must do the following :

- Compile the directory content files and required Library files :
  + 71x_lib.c
  + 71x_gpio.c
  + 71x_apb.c
  + 71x_rtc.c
  + 71x_eic.c


- Link all compiled files and load your image into either RAM or FLASH
- Run the example 


******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****
