/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Version            : V4.0
* Date               : 10/09/2007
* Description        : Description of the TIMER Output Compare Example.
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================

This Device is configured to Toggle the TIM1 Output Compare A pin from low
level to high level after 0xA000 timer period. The GPIO pin is also toggled from
low level to high level and may be used as a reference to verify the delay of 
the Output Compare function.
 
                                    __________________________
                                    |                          TIM1 OCMPA
            ________________________|
                          ____________________________________
                         |                                     GPIO0 pin
            _____________|
                         <---------->
                         Output Compare Delay

Directory contents
==================
 71x_conf.h  Library Configuration file
 71x_it.c    Interrupt handlers
 71x_it.h    Interrupt handlers header file
 main.c      Main program
 
 
Hardware environment
====================

Connect a scope on P1.7 pin to visualize the TIM1 OCMPA signal.


How to use it
=============
In order to make the program work, you must do the following:
- Create a project and setup all your toolchain's start-up files
- Compile the directory content files and required Library files :
  + 71x_lib.c
  + 71x_gpio.c
  + 71x_apb.c
  + 71x_eic.c
  + 71x_tim.c

- Link all compiled files and load your image into either RAM or FLASH
- Run the example 

******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****
