/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Version            : V4.0
* Date               : 10/09/2007
* Description        : Description of the TIMER One Pulse Mode Example.
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================

The timer is configured to generate a pulse on the output compare A pin (P1.2) 
with configurable fixed length timer period. The pulse generation is activated by  
an external rising edge on the input capture A (P1.1).
 
                      ______        __        ______
                     |      |      |  |      |      |
Input Capture A _____|      |______|  |______|      |___
                      ___           ___       ___
                     |   |         |   |     |   |
Output CompareA  ____|   |_________|   |_____|   |______
                     <--->
                  Same Pulse Length



Directory contents
==================
 71x_conf.h  Library Configuration file
 71x_it.c    Interrupt handlers
 71x_it.h    Interrupt handlers header file
 main.c      Main program


Hardware environment
====================
This example works as standalone on the STR71x-Eval board (mb393) and extra 
hardware implementation is not required to run the example.
Just connect a scope to visualize the TIM3 OCMPA signal (P1.2) and apply
a pulse on input capture A (P1.1).


How to use it
=============
In order to make the program work, you must do the following:
- Create a project and setup all your toolchain's start-up files
- Compile the directory content files and required Library files :
  + 71x_lib.c
  + 71x_gpio.c
  + 71x_apb.c
  + 71x_tim.c

- Link all compiled files and load your image into either RAM or FLASH
- Run the example


******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****
