/******************** (C) COPYRIGHT 2005 STMicroelectronics **********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Date First Issued  : 09/27/2005 :  V1.0
* Description        : Description of the WDG example
**********************************************************************************
* History:
* 09/27/2005 :  V1.0
*********************************************************************************
 THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
 CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
 AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
 OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
 OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
 CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
**********************************************************************************

Example description
===================
This example configures the watchdog in timer mode and enables the generation
of an end count interrupt. For each end of count,the system changes
the state of all leds mounted on STR73x-Eval board and connected to the GPIO4.

Directory contents
==================
73x_conf.h Library Configuration file
73x_it.c    Interrupt handlers
main.c      Main program

How to use it
=============
In order to make the program work, you must do the following :
- Create a project and setup all your toolchain's start-up files
- Compile the directory content files and required Library files :
  + 73x_lib.c
  + 73x_cfg.c
  + 73x_eic.c
  + 73x_gpio.c
  + 73x_wdg.c
  + 73x_prccu.c
- Link all compiled files & load program into either RAM or Flash 
- Run the example


******************* (C) COPYRIGHT 2005 STMicroelectronics *****END OF FILE****
