/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Date First Issued  : 07/17/2006
* Description        : Description of the TB Example3.
********************************************************************************
* History:
* 07/17/2006 : V1.0
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================
This example shows how to use the RTC clock as TB counter clock source (TB APB 
interface still clocked by CK_TIM). The TB is used in Timing mode and generates
a time base equal to 1s.

The RTC clock frequency is equal to 32.768 KHz, the TB is running at 4096 Hz and  
the Update period is equal to 1s. 

On each Update event, an interrupt is generated and a led connected to P2.18
is toggled.


Directory contents
==================
75x_conf.h  Library Configuration file
75x_it.c    Interrupt handlers
main.c      Main program


Hardware environment
====================
 - Connect a led to pin P2.18(LD4 on STR75x-EVAL board).

    
How to use it
=============
In order to make the program work, you must do the following :
- Create a project and setup all your toolchain's start-up files
- Compile the directory content files and required Library files :
  + 75x_lib.c
  + 75x_tb.c
  + 75x_gpio.c
  + 75x_mrcc.c
  + 75x_eic.c
  + 75x_cfg.c
  
- Link all compiled files and load your image into either RAM or Flash
- Run the example


******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE******
