M-750 Series - Battery Selector Master Disconnect Switches
DataSheet:Download M-750 Series Datasheet
For any vehicle that needs to use two batteries where one battery is used for starting the engine, while the other is used to power auxiliary loads. This is a common situation in trucks, boats, RVs, police and rescue vehicles, and in ambulances or fire equipment. A selector switch allows use of the first battery, the second battery, or both batteries simultaneously. This provides back-up starting power in an emergency.
Features
These switches combine the functions of Battery Selector and Master Disconnect Switches to give four battery power options:
Battery selector switches provide a positive battery disconnect, which has many advantages:
Specifications- Power cut off at the source
- Power On, Battery 2
- Power On, Battery 1
- Power On, both Batteries
- It gives a reliable shutdown of power during maintenance
- The version with the key protects against theft of the vehicle, when unattended
- It helps protect against electrical fires, when the vehicle is not in use, and minimizes battery drain
- Rating: 500A intermittent, 310A continuous, 6-36V DC Electrical ratings on UL labels are conservative. Electrical Ratings Labeled UL 707B
- Use with either alternators or generators
- Make before break design permits operation through the three On positions with the engines running. Engines should always be shut down before turning to Off.
- Heavy-Duty Construction Vaporproof, weather-, dust- and corrosion-resistant.
- Durable, fracture-resistant high temperature plastic case, knob and insulator.
- Switches conform to USCG section 183.410 for ignition protection.
- Heavy duty copper stud terminals, with brass hexnuts.
- Can be surface mounted, or installed through a 3 5/16" diameter hole in the panel.
- Dimensions: Flange: 6" (152.4mm) diameter, overall height 2 5/8" (66.7mm).
- Terminals: 3 copper studs, 3/8" (9.5mm) diameter.
Ordering Information
| Catalog # | Description | UL listed | Rating | Terminals | Actuator | Case | Size | Installation | Overall height | Max voltage rating |
|---|---|---|---|---|---|---|---|---|---|---|
| M-750 | Basic model | Marine UL Listed | 6-36V DC; 310A Continuous 500A intermittent | three 3/8 copper studs | Plastic Knob | Engineering thermoplastic | 6 flange diameter | Surface MountThrough-Hole 3-5/16 | 2-5/8 | 36 Vdc |
| M_751 | With lock | Marine UL Listed | 6-36V DC; 310A Continuous 500A intermittent | three 3/8 copper studs | Plastic Knob | Engineering thermoplastic | 6 flange diameter | Surface MountThrough-Hole 3-5/16 | 2-5/8 | 36 Vdc |
| M_752 | With alternator field disconnect | Marine UL Listed | 6-36V DC; 310A Continuous 500A intermittent | three 3/8 copper studs | Plastic Knob | Engineering thermoplastic | 6 flange diameter | Surface MountThrough-Hole 3-5/16 | 2-5/8 | 36 Vdc |
| M_753 | With lock and alternator field disconnect | Marine UL Listed | 6-36V DC; 310A Continuous 500A intermittent | three 3/8 copper studs | Plastic Knob | Engineering thermoplastic | 6 flange diameter | Surface MountThrough-Hole 3-5/16 | 2-5/8 | 36 Vdc |
| M_754 | With pilot light | Marine UL Listed | 6-36V DC; 310A Continuous 500A intermittent | three 3/8 copper studs | Plastic Knob | Engineering thermoplastic | 6 flange diameter | Surface MountThrough-Hole 3-5/16 | 2-5/8 | 36 Vdc |
| M_754-01 | With pilot and pilot circuit | Marine UL Listed | 6-36V DC; 310A Continuous 500A intermittent | three 3/8 copper studs | Plastic Knob | Engineering thermoplastic | 6 flange diameter | Surface MountThrough-Hole 3-5/16 | 2-5/8 | 36 Vdc |
Resources
- Datasheet
- Download M-750 Series Datasheet m750
- Download M-750 Series Datasheet m750
