The AD5625R/AD5645R/AD5665R and AD5625/AD5665 members of the nanoDAC® family are low power, quad, 12-/ 14-/16-bit, buffered voltage-out DACs with/without an on-chip reference. All devices operate from a single 2.7 V to 5.5 V supply, are guaranteed monotonic by design, and have an I2 C-compatible serial interface.
The AD5625R/AD5645R/AD5665R have an on-chip reference. The LFCSP versions of the AD5625R/AD5645R/AD5665R have a 1.25 V or 2.5 V, 10 ppm/°C reference, giving a full-scale output range of 2.5 V or 5 V; the TSSOP versions of the AD5625R/AD5645R/AD5665R have a 2.5 V, 5 ppm/°C reference, giving a full-scale output range of 5 V. The WLCSP has a 1.25 V reference. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. The AD5625/AD5665 require an external reference voltage to set the output range of the DAC.
The device incorporates a power-on reset circuit that ensures that the DAC output powers up to 0 V (POR = GND) or midscale (POR = VDD) and remains there until a valid write occurs. The on-chip precision output amplifier enables rail-to-rail output swing.
The AD5625R/AD5645R/AD5665R and AD5625/AD5665 use a 2-wire I2C-compatible serial interface that operates in standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes.
Applications
Features and Benefits
| Digital to Analog Converters |
Document | note |
AD5625R/AD5645R/AD5665R/AD5625/AD5665: Quad, 12-/14-/16-Bit nanoDACs with 5 ppm/°C On-Chip Reference, I2C Interface Data Sheet (Rev. D) | PDF 1609 kB |
Part Number | Package | Packing Qty | Temp Range | Price 100-499 | Price 1000+ | RoHS |
---|---|---|---|---|---|---|
AD5625BCPZ-R2 Production | 10 ld LFCSP (3x3mm) | REEL 250 | -40 to 105C | 0 | 4.98 | Y |
AD5625BCPZ-REEL7 Production | 10 ld LFCSP (3x3mm) | REEL 1500 | -40 to 105C | 0 | 4.7 | Y |
AD5625BRUZ Production | 14 ld TSSOP | OTH 96 | -40 to 105C | 5.53 | 4.7 | Y |
AD5625BRUZ-REEL7 Production | 14 ld TSSOP | REEL 1000 | -40 to 105C | 0 | 4.7 | Y |