• 简体中文
• English

AD7352 Differential Input, Dual, Simultaneous Sampling, 3 MSPS, 12-Bit, SAR ADC

The AD7352 is a dual, 12-bit, high speed, low power, successive approximation ADC that operates from a single 2.5 V power supply and features throughput rates up to 3 MSPS. The part contains two ADCs, each preceded by a low noise, wide band-width track-and-hold circuit that can handle input frequencies in excess of 110 MHz. Two Complete ADC Functions. These functions allow simultaneous sampling and conversion of two channels. The conversion result of both channels is simultaneously available on separate data lines or in suc-cession on one data line if only one serial port is available. High Throughput With Low Power Consumption. The AD7352 offers a 3 MSPS throughput rate with 26 mW power consumption. No Conversion Latency. The AD7352 features two standard successive approx-imation ADCs with accurate control of the sampling instant via aCS input and, once off, conversion control.

The conversion process and data acquisition use standard control inputs allowing for easy interfacing to microprocessors or DSPs. The input signal is sampled on the falling edge of CS; and a conversion is also initiated at this point. The conversion time is determined by the SCLK frequency.

The AD7352 uses advanced design techniques to achieve very low power dissipation at high throughput rates. With a 2.5 V supply and a 3 MSPS throughput rate, the part consumes 10 mA typically. The part also offers a flexible power/throughput rate management options.

The analog input range for the part is the differential common-mode ±VREF/2. The AD7352 has an on-chip 2.048 V reference that can be overdriven when an external reference is preferred. The AD7352 is available in a 16-lead thin shrink small outline package (TSSOP).

Product Highlights

• Two Complete ADC Functions. These functions allow simultaneous sampling and conversion of two channels. The conversion result of both channels is simultaneously available on separate data lines or in suc-cession on one data line if only one serial port is available.
• High Throughput With Low Power Consumption. The AD7352 offers a 3 MSPS throughput rate with 26 mW power consumption.
• No Conversion Latency. The AD7352 features two standard successive approx-imation ADCs with accurate control of the sampling instant via aCS input and, once off, conversion control.

Applications

• Data acquisition systems
• Motion control
• I and Q demodulation

Data Sheets

Order Information

Evaluation Boards

Reference Materials

• Circuit Notes：CN-0040: DC-Coupled, Single-Ended-to-Differential Conversion Using the...
• Technical Articles：MS-2210: Designing Power Supplies for High Speed ADC