• 简体中文
• English

AD7923 4-Channel 200 kSPS, 12-Bit A/D Converter with Sequencer in 16-Lead TSSOP

The AD7923 is a 12-bit, high speed, low power, 4-channel, successive-approximation (SAR) ADC. It operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 200 kSPS. It contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 8 MHz.

The conversion process and data acquisition are controlled by CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and conversion is also initiated at this point.

The AD7923 uses advanced design techniques to achieve very low power dissipation at maximum throughput rates. At maximum throughput rates, it consumes 1.2 mA maximum with 3 V supplies and 1.5 mA maximum with 5 V supplies.

Through the configuration of the control register, the analog input range can be selected as 0 V to REFIN or 0 V to 2 × REFIN, with either straight binary or twos complement output coding. The AD7923 features four single-ended analog inputs with a channel sequencer to allow a preprogrammed selection of channels to be converted sequentially.

The conversion time for the AD7923 is determined by the serial clock, SCLK, frequency, since this is used as the master clock to control the conversion. The conversion time can be as short as 800 ns with a 20 MHz SCLK.

Data Sheets

Application Notes

Product Highlight

Technical Books

Order Information

Reference Materials

• Tutorials：MT-002: What the Nyquist Criterion Means to Your Sampled Data System Design
• Tutorials：MT-031: Grounding Data Converters and Solving the Mystery of "AGND" and "DGND"
• Tutorials：MT-001: Taking the Mystery out of the Infamous Formula, "SNR=6.02N +...
• Product Selection Guide：SAR ADC & Driver Quick-Match Guide
• Technical Articles：MS-2210: Designing Power Supplies for High Speed ADC
• Technical Articles：MS-1779: Nine Often Overlooked ADC Specifications