AD8133 Triple Differential Driver with Output Pull-Down _ BDTIC a Leading Distributor in China

AD8133 Triple Differential Driver with Output Pull-Down

The AD8133 is a major advancement beyond using discrete op amps for driving differential RGB signals over twisted pair cable. The AD8133 is a triple, low cost differential or single-ended input to differential output driver, and each amplifier has a fixed gain of 2 to compensate for the attenuation of line termination resistors. The AD8133 is specifically designed for RGB signals but can be used for any type of analog signals or high speed data transmission. The AD8133 is capable of driving either Category 5 unshielded twisted pair (UTP) cable or differential printed circuit board transmission lines with minimal signal degradation.

The outputs of the AD8133 can be set to a low voltage state to be used with series diodes for line isolation, allowing easy differential multiplexing over the same twisted pair cable. The AD8133 driver can be used in conjunction with the AD8129 and AD8130 differential receivers.

Manufactured on Analog Devices’ next generation XFCB bipolar process, the AD8133 has a large signal bandwidth of 225 MHz and a slew rate of 1600 V/µs. The AD8133 has an internal common-mode feedback feature that provides output amplitude and phase matching that is balanced to −60 dB at 50 MHz, suppressing harmonics and minimizing radiated electromagnetic interference (EMI).

The output common-mode level is easily adjustable by applying a voltage to the VOCM input pin. The VOCM input can also be used to transmit signals on the output common-mode voltages. The AD8133 is available in a 24-lead LFCSP package and can operate over the temperature range of −40°C to +85°C.

Applications

Features and Benefits

Triple high speed fully differential driver

225 MHz −3 dB large signal bandwidth

Easily drives 1.4 V p-p video signal into source-terminated 100 Ω UTP cable

1600 V/µs slew rate

Fixed internal gain of 2

Internal common-mode feedback network

Output balance error −60 dB @ 50 MHz

Differential input and output

Differential-to-differential or single-ended-to-differential operation

Adjustable output common-mode voltage

Output pull-down feature for line isolation

Low distortion: 64 dB SFDR @ 10 MHz on 5 V supply, RL, dm = 200 Ω

Low offset: 4 mV typical output referred on 5 V supply

Low power: 26 mA @ 5 V for three drivers

Wide supply voltage range: +5 V to ±5 V

Available in space-saving packaging: 4 mm × 4 mm LFCSP

Amplifiers

Audio & Video Products

Video Amplifiers & Analog Video Functions

SPICE Models

AD8133 SPICE Macro Model .CIR

Data Sheets

Document	note
AD8133: Triple Differential Driver With Output Pull-Down Data Sheet (Rev. A)	PDF 393.34 K

Order Information

Part Number	Package	Packing Qty	Temp Range	Price 100-499	Price 1000+	RoHS
AD8133ACPZ-R2 Production	24 ld LFCSP (4x4x.75mm w/2.10mm EP)	REEL 250	-40 to 85C	3.55	3.55	Y
AD8133ACPZ-REEL Production	24 ld LFCSP (4x4x.75mm w/2.10mm EP)	REEL 5000	-40 to 85C	0	0	Y
AD8133ACPZ-REEL7 Production	24 ld LFCSP (4x4x.75mm w/2.10mm EP)	REEL 1500	-40 to 85C	0	2.62	Y