ADA4691-4 Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Quad Op Amp

Applications Photodiode amplifier Sensor amplifier Portable instrumentation Portable medical devices Portable audio: MP3, PDA, smart phone, notebook Headphone speaker driver Communications Low-side current sense ADC driver Active filter Sample-and-hold Automotive sensors

The ADA4691-4 is a quad rail-to-rail output, single-supply amplifier featuring low power, wide bandwidth, and low noise. The ADA4691-4 has two independent shutdown pins, allowing further reduction in supply current. These amplifiers are ideal for a wide variety of applications. Audio preamps, filters, IR/photodiode amplifiers, charge amps, and high impedance sensors all benefit from this combination of performance features. The ADA4692-4 is a quad version without shutdown in a 14-lead TSSOP package.

Applications for these amplifiers include consumer audio personal players with low noise and low distortion that provide enough gain and slew rate response over the audio band at low power. Industrial applications with high impedance sensors, such as pyroelectric sensors and other IR sensors, benefit from the high impedance input, low offset drift, and enough band-width and response for low gain applications.

The ADA4691-4 is specified over the extended industrial temperature range (−40°C to +125°C). The ADA4691-4 is available in a 16-lead LFCSP packages.

Applications
  • Photodiode amplifier
  • Sensor amplifier
  • Portable instrumentation
  • Portable medical devices
  • Portable audio: MP3, PDA, smart phone, notebook
  • Headphone speaker driver
  • Communications
  • Low-side current sense
  • ADC driver
  • Active filter
  • Sample-and-hold
  • Automotive sensors
Features and Benefits
  • Low power: 180 μA typical
  • Low distortion: 0.003% THD + N
  • Low noise: 16 nV/√Hz typical
  • 3.6 MHz bandwidth
  • Offset voltage: 500 μV typical
  • Low offset voltage drift: 4 μV/°C maximum
  • Very low input bias currents:
    0.5 pA typical
  • 2.7 V to 5 V single supply or ±1.35 V
    to ±2.5 V dual supply
  • Available in small 3 mm × 3mm
    LFCSP packages
  • Amplifiers
    Data Sheets
    Documentnote
    Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers (Rev. D)PDF 699 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADA4691-4ACPZ-R2 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 250-40 to 125C1.631.63Y
    ADA4691-4ACPZ-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C00.9Y
    ADA4691-4ACPZ-RL Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 5000-40 to 125C00.9Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    EVAL-PRAOPAMP-4RUZQUAD 14-Lead TSSOP Evaluation Board20.19Y
    EVAL-PRAOPAMP-4RZQUAD R-14 lead SOIC Evaluation Board20.19Y
    Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers (Rev. D) ada4692-2
    低功耗、3.6 MHz、低噪声、轨到轨输出运算放大器 (Rev. D) ada4692-2