• 简体中文
• English

ADG5212 High Voltage Latch-Up Proof, Quad SPST Switches

The ADG5212/ADG5213 contain four independent single-pole/single-throw (SPST) switches. The ADG5212 switches turn on with Logic 1. The ADG5213 has two switches with digital control logic similar to that of the ADG5212; however, the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on, and each switch has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. APPLICATIONS Trench Isolation Guards Against Latch-Up. A dielectric trench separates the P and N channel transistors thereby preventing latch-up even under severe overvoltage conditions. Ultralow capacitance and < 1 pC charge injection. Dual-Supply Operation. For applications where the analog signal is bipolar, the ADG5212/ADG5213 can be operated from dual supplies up to ±22 V. Single-Supply Operation. For applications where the analog signal is unipolar, the ADG5212/ADG5213 can be operated from a single rail power supply up to 40 V. 3 V Logic Compatible Digital Inputs. VINH = 2.0 V, VINL = 0.8 V. No VL Logic Power Supply Required.

The ADG5212 and ADG5213 do not have a VL pin. The digital inputs are compatible with 3 V logic inputs over the full operating supply range.

The ultralow capacitance and charge injection of these switches make them ideal solutions for data acquisition and sample-and-hold applications, where low glitch and fast settling are required. Fast switching speed together with high signal bandwidth make the parts suitable for video signal switching.

Product Highlights

• Trench Isolation Guards Against Latch-Up. A dielectric trench separates the P and N channel transistors thereby preventing latch-up even under severe overvoltage conditions.
• Ultralow capacitance and < 1 pC charge injection.
• Dual-Supply Operation. For applications where the analog signal is bipolar, the ADG5212/ADG5213 can be operated from dual supplies up to ±22 V.
• Single-Supply Operation. For applications where the analog signal is unipolar, the ADG5212/ADG5213 can be operated from a single rail power supply up to 40 V.
• 3 V Logic Compatible Digital Inputs. VINH = 2.0 V, VINL = 0.8 V.
• No VL Logic Power Supply Required.

Data Sheets

User Guides

Order Information

Evaluation Boards

Reference Materials

• Product Selection Guide：Switches and Multiplexers Product Selection Guide