ADM1063 Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring

Central office systems Servers/routers Multivoltage system line cards DSP/FPGA supply sequencing In-circuit testing of margined supplies

The ADM1063 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. In addition to these functions, the ADM1063 integrates a 12-bit ADC that can be used to accurately read back up to 12 separate voltages.

The device also provides up to 10 programmable inputs for monitoring under, over, or out-of-window faults on up to 10 supplies. In addition, 10 programmable outputs can be used as logic enables. Six of these programmable outputs can provide up to a 12 V output for driving the gate of an n-FET that can be placed in the path of a supply.

Applications

Features and Benefits
  • Complete supervisory and sequencing solution for up to 10 supplies
  • 10 supply fault detectors enable supervision of supplies to
    • <0.5% accuracy at all voltages at 25°C
    • <1.0% accuracy across all voltages and temperatures
  • <0.5% accuracy at all voltages at 25°C
  • <1.0% accuracy across all voltages and temperatures
  • 5 selectable input attenuators allow supervision of supplies to
    • 14.4 V on VH
    • 6 V on VP1 to VP4 (VPx)
  • 14.4 V on VH
  • 6 V on VP1 to VP4 (VPx)
  • See data sheet for additional features
  • Download ADM1063-EP data sheet (pdf)
  • Power Management
    Data Sheets
    Documentnote
    ADM1063: Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring Data Sheet (Rev. C)PDF 664 kB
    ADM1063-EP: Enhanced Product Data Sheet (Rev. A)PDF 401.29 K
    Application Notes
    Documentnote
    AN-1009: Block Erasing, Reading and Writing to the ADM106x EEPROM (Rev. A)PDF 63 kB
    AN-1086: Using an ADM106x in a Hot Swap Application (Rev. 0)PDF 59 kB
    AN-0997: Ping-Pong Configuration Guide for ADM1062 to ADM1069 Devices (Rev. A)PDF 172 kB
    AN-1001: Checksum Calculations (Rev. A)PDF 76 kB
    AN-897: ADC Readback Code (Rev. A)PDF 65 kB
    AN-0973: Erasing and Programming the Sequencing Engine EEPROM (Rev. A)PDF 61 kB
    AN-0975: Automatic Generation of State Diagrams for the ADM1062 to ADM1069 Using Graphviz (Rev. A)PDF 209 kB
    AN-722: Watchdog Detection Using the ADM106x (Rev. 0)PDF 179 kB
    AN-698: Configuration Registers of ADM1062/ADM1063/ADM1064/ADM1065/ADM1066/ADM1067/ADM1166 (Rev. C)PDF 561 kB
    AN-782: Monitoring High Voltages with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0)PDF 61 kB
    AN-781: Monitoring Additional Supplies with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0)PDF 96 kB
    AN-780: Monitoring Negative Voltages with the ADM1062 to ADM1069 Super Sequencers (Rev. A)PDF 98 kB
    AN-723: Interrupt Generation Using the ADM106x (Rev. 0)PDF 262 kB
    User Guides
    Documentnote
    UG-404: USB-SDP-CABLEZ Serial Interface BoardPDF 536 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADM1063ACPZ Production40 ld LFCSP (6x6mm w/4.1mm pad)OTH 490-40 to 85C9.578.77Y
    ADM1063ACPZ-REEL7 Production40 ld LFCSP (6x6mm w/4.1mm pad)REEL 750-40 to 85C08.77Y
    ADM1063ASUZ Production48 ld TQFP (7x7mm)OTH 250-40 to 85C9.578.77Y
    ADM1063ASUZ-REEL7 Production48 ld TQFP (7x7mm)REEL 500-40 to 85C9.578.77Y
    ADM1063BCPZ-EP-RL7 Production40 ld LFCSP (6x6mm w/4.1mm pad)REEL 750-40 to 105C035Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    EVAL-ADM1063TQEBZEvaluation board for device allowing user to configure the board to match their own configuration. The kit includes a TQFP socket. Multiple boards can be cascaded (cable included), allowing evaluation of multi-device systems.318.78Y
    SOCKET-ADM106XLFZOptional LFCSP Socket for ADM1062-67 and ADM1166. This can be used with the evaluation board if required.120Y
    SOCKET-ADM106XTQZOptional TQFP Socket for ADM1062-67 and ADM1166. This can be used with the evaluation board if required.95Y
    USB-SDP-CABLEZUSB to Serial I/O Interface. One is required and can support multiple eval kits.89Y
    Reference Materials
    ADM1063: Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring Data Sheet (Rev. C) adm1063
    ADM1063-EP: Enhanced Product Data Sheet (Rev. A) adm1063
    AN-0973: 超级时序控制器的EEPROM擦除和编程 (Rev. A) adm1060
    AN-780: 利用ADM1062至ADM1069超级时序控制器监控负电压 (Rev. A) adm1064
    AN-1009: Block Erasing, Reading and Writing to the ADM106x EEPROM (Rev. A) adm1065
    AN-1009: ADM106x EEPROM的块擦除、块读取和块写入 (Rev. 0) adm1065
    AN-1086: ADM106x的热插拔应用 (Rev. 0) adm1064
    AN-1086: Using an ADM106x in a Hot Swap Application (Rev. 0) adm1064
    AN-0997: Ping-Pong Configuration Guide for ADM1062 to ADM1069 Devices (Rev. A) adm1064
    AN-0997: ADM1062至ADM1069的“乒乓”配置指南 (Rev. 0) adm1064
    AN-1001: Checksum Calculations (Rev. A) adm1064
    AN-1001: 校验和计算 (Rev. 0) adm1064
    AN-897: ADC回读代码 (Rev. A) adm1060
    AN-897: ADC Readback Code (Rev. A) adm1060
    AN-0973: Erasing and Programming the Sequencing Engine EEPROM (Rev. A) adm1060
    AN-0975: 利用Graphviz自动生成ADM1062至ADM1069的状态图 (Rev. A) adm1064
    AN-0975: Automatic Generation of State Diagrams for the ADM1062 to ADM1069 Using Graphviz (Rev. A) adm1064
    AN-722: Watchdog Detection Using the ADM106x (Rev. 0) adm1060
    AN-698: Configuration Registers of ADM1062/ADM1063/ADM1064/ADM1065/ADM1066/ADM1067/ADM1166 (Rev. C) adm1064
    AN-698: ADM1062/ADM1063/ADM1064/ADM1065/ADM1066/ADM1067/ADM1166的配置寄存器 (Rev. B) adm1064
    AN-782: 利用ADM1062–ADM1069 Super Sequencers™超级时序控制器监控高电压 (Rev. 0) adm1064
    AN-782: Monitoring High Voltages with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0) adm1064
    AN-781: 利用ADM1062–ADM1069 Super SequencersTM超级时序控制器监控额外电源 (Rev. 0) adm1064
    AN-781: Monitoring Additional Supplies with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0) adm1064
    AN-780: Monitoring Negative Voltages with the ADM1062 to ADM1069 Super Sequencers (Rev. A) adm1064
    AN-723: 利用ADM106x产生中断 (Rev. 0) adm1060
    AN-723: Interrupt Generation Using the ADM106x (Rev. 0) adm1060
    UG-404: USB-SDP-CABLEZ Serial Interface Board adm1064
    UG-049:ADM1062至ADM1169超级时序控制器软件 adm1064
    Supervisory Devices Complementary Parts Guide for Altera FPGAs adm690
    Supervisory Devices Complementary Parts Guide for Xilinx FPGAs adm690
    Power Supply Sequencing Bulletin (2007) adm1060