ADM1068 Compact Multi-Voltage Sequencer and Supervisor

The ADM1068 Super Sequencer® is a configurable supervisory/ sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. Central office systems Servers/routers Multivoltage system line cards DSP/FPGA supply sequencing In-circuit testing of margined supplies

The device also provides up to eight programmable inputs for monitoring undervoltage faults, overvoltage faults, or out-of-window faults on up to eight supplies. In addition, eight programmable outputs can be used as logic enables. Six of these programmable outputs can also provide up to a 12 V output for driving the gate of an N-FET that can be placed in the path of a supply.

The logical core of the device is a sequencing engine. This state-machine-based construction provides up to 63 different states. This design enables very flexible sequencing of the outputs, based on the condition of the inputs.

The ADM1068 is controlled via configuration data that can be programmed into an EEPROM. The whole configuration can be programmed using an intuitive GUI-based software package provided by Analog Devices, Inc.

Features and Benefits
  • Complete Supervisory and Sequencing Solution for up to 8 Supplies
  • 8 Supply Fault Detectors Enable Supervision of Supplies to Better than 1% Accuracy
  • 4 Selectable Input Attenuators Allow Supervision:
    Supplies up to 14.4 V on VH
    Supplies up to 6 V on VP1–3
  • High Impedance Input to Supply Fault Detector with Thresholds between 0.573 V and 1.375 V
  • 4 Dual-function Inputs, VX1–4
  • General-purpose Logic Input
  • 8 Programmable Output Drivers PDO1–8:
    Open Collector with External Pull-up
    Push/pull Output, Driven to VDDCAP or VPn
    Open Collector with Weak Pull-up to VDDCAP or VPn
    Internally Charge-pumped High Drive for Use with External N-FET PDO1–6 only
  • Power Management
    Data Sheets
    Documentnote
    ADM1068: Super Sequencer™ and Monitor Data Sheet (Rev. D)PDF 461 kB
    Application Notes
    Documentnote
    AN-1009: Block Erasing, Reading and Writing to the ADM106x EEPROM (Rev. A)PDF 63 kB
    AN-1086: Using an ADM106x in a Hot Swap Application (Rev. 0)PDF 59 kB
    AN-0997: Ping-Pong Configuration Guide for ADM1062 to ADM1069 Devices (Rev. A)PDF 172 kB
    AN-1001: Checksum Calculations (Rev. A)PDF 76 kB
    AN-897: ADC Readback Code (Rev. A)PDF 65 kB
    AN-0973: Erasing and Programming the Sequencing Engine EEPROM (Rev. A)PDF 61 kB
    AN-0975: Automatic Generation of State Diagrams for the ADM1062 to ADM1069 Using Graphviz (Rev. A)PDF 209 kB
    AN-722: Watchdog Detection Using the ADM106x (Rev. 0)PDF 179 kB
    AN-721: ADM1068/ADM1069/ADM1168/ADM1169 Configuration Registers (Rev. B)PDF 500 kB
    AN-782: Monitoring High Voltages with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0)PDF 61 kB
    AN-781: Monitoring Additional Supplies with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0)PDF 96 kB
    AN-780: Monitoring Negative Voltages with the ADM1062 to ADM1069 Super Sequencers (Rev. A)PDF 98 kB
    AN-723: Interrupt Generation Using the ADM106x (Rev. 0)PDF 262 kB
    User Guides
    Documentnote
    UG-404: USB-SDP-CABLEZ Serial Interface BoardPDF 536 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADM1068ASTZ Production32 ld LQFP (7x7mm)OTH 250-40 to 85C4.354.05Y
    ADM1068ASTZ-REEL7 Production32 ld LQFP (7x7mm)REEL 500-40 to 85C04.05Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    EVAL-ADM1067TQEBZEvaluation board for device allowing user to configure the board to match their own configuration. The kit includes a TQFP socket. Multiple boards can be cascaded (cable included), allowing evaluation of multi-device systems.303.6Y
    SOCKET-ADM106XLFZOptional LFCSP Socket for ADM1062-67 and ADM1166. This can be used with the evaluation board if required.120Y
    SOCKET-ADM106XTQZOptional TQFP Socket for ADM1062-67 and ADM1166. This can be used with the evaluation board if required.95Y
    USB-SDP-CABLEZUSB to Serial I/O Interface. One is required and can support multiple eval kits.89Y
    Reference Materials
    ADM1068: Super Sequencer™ and Monitor Data Sheet (Rev. D) adm1068
    AN-0973: 超级时序控制器的EEPROM擦除和编程 (Rev. A) adm1060
    AN-780: 利用ADM1062至ADM1069超级时序控制器监控负电压 (Rev. A) adm1064
    AN-1009: Block Erasing, Reading and Writing to the ADM106x EEPROM (Rev. A) adm1065
    AN-1009: ADM106x EEPROM的块擦除、块读取和块写入 (Rev. 0) adm1065
    AN-1086: ADM106x的热插拔应用 (Rev. 0) adm1064
    AN-1086: Using an ADM106x in a Hot Swap Application (Rev. 0) adm1064
    AN-0997: Ping-Pong Configuration Guide for ADM1062 to ADM1069 Devices (Rev. A) adm1064
    AN-0997: ADM1062至ADM1069的“乒乓”配置指南 (Rev. 0) adm1064
    AN-1001: Checksum Calculations (Rev. A) adm1064
    AN-1001: 校验和计算 (Rev. 0) adm1064
    AN-897: ADC回读代码 (Rev. A) adm1060
    AN-897: ADC Readback Code (Rev. A) adm1060
    AN-0973: Erasing and Programming the Sequencing Engine EEPROM (Rev. A) adm1060
    AN-0975: 利用Graphviz自动生成ADM1062至ADM1069的状态图 (Rev. A) adm1064
    AN-0975: Automatic Generation of State Diagrams for the ADM1062 to ADM1069 Using Graphviz (Rev. A) adm1064
    AN-722: Watchdog Detection Using the ADM106x (Rev. 0) adm1060
    AN-721: ADM1068/ADM1069/ADM1168/ADM1169 Configuration Registers (Rev. B) adm1068
    AN-721: ADM1068/ADM1069/ADM1168/ADM1169的配置寄存器 (Rev. A) adm1068
    AN-782: 利用ADM1062–ADM1069 Super Sequencers™超级时序控制器监控高电压 (Rev. 0) adm1064
    AN-782: Monitoring High Voltages with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0) adm1064
    AN-781: 利用ADM1062–ADM1069 Super SequencersTM超级时序控制器监控额外电源 (Rev. 0) adm1064
    AN-781: Monitoring Additional Supplies with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0) adm1064
    AN-780: Monitoring Negative Voltages with the ADM1062 to ADM1069 Super Sequencers (Rev. A) adm1064
    AN-723: 利用ADM106x产生中断 (Rev. 0) adm1060
    AN-723: Interrupt Generation Using the ADM106x (Rev. 0) adm1060
    UG-404: USB-SDP-CABLEZ Serial Interface Board adm1064
    UG-049:ADM1062至ADM1169超级时序控制器软件 adm1064
    Supervisory Devices Complementary Parts Guide for Altera FPGAs adm690
    Supervisory Devices Complementary Parts Guide for Xilinx FPGAs adm690
    Power Supply Sequencing Bulletin (2007) adm1060