ADN4668 3 V LVDS Quad CMOS Differential Line Receiver

The ADN4668 is a quad-channel CMOS, low voltage differential signaling (LVDS) line receiver offering data rates of over 400 Mbps (200 MHz) and ultralow power consumption. It features a flow-through pin configuration for easy PCB layout and separation of input and output signals. The device accepts low voltage (310 mV typical) differential input signals and converts them to a single-ended, 3 V TTL/CMOS logic level.

The ADN4668 also offers active-high and active-low enable/disable inputs (EN and overbar: EN) that control all four receivers. They disable the receivers and switch the outputs to a high impedance state. This high impedance state allows the outputs of one or more ADN4668s to be multiplexed together and reduces the quies-cent power consumption to 3 mW typical. The ADN4668 and its companion driver, the ADN4667, offer a new solution to high speed, point-to-point data transmission and a low power alternative to emitter-coupled logic (ECL) or positive emitter-coupled logic (PECL).

Features and Benefits
  • ±15 kV ESD protection on receiver input pins
  • 400 Mbps (200 MHz) switching rates
  • Flow-through pin configuration simplifies PCB layout
  • 150 ps channel-to-channel skew (typical)
  • 100 ps differential skew (typical)
  • 2.7 ns maximum propagation delay
  • 3.3 V power supply
  • High impedance outputs on power-down
  • Low power design (3 mW quiescent typical)
  • Interoperable with existing 5 V LVDS drivers
  • Accepts small swing (310 mV typical) differential input signal levels
  • Supports open, short, and terminated input fail-safe
  • Interface & Isolation
    ADN4668 IBIS Model
    Data Sheets
    Documentnote
    ADN4668: 3 V LVDS Quad CMOS Differential Line Receiver Data Sheet (Rev. A)PDF 304 kB
    Application Notes
    Documentnote
    AN-1179: Junction Temperature Calculation for Analog Devices RS-485/RS-422, CAN, and LVDS/M-LVDS Transceivers (Rev. A)PDF 156.87 K
    AN-1177: LVDS and M-LVDS Circuit Implementation Guide (Rev. 0)PDF 586 kB
    AN-1176: Component Footprints and Symbols in the Binary .Bxl File Format (Rev. 0)PDF 671 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADN4668ARUZ Production16 ld TSSOPOTH 96-40 to 85C1.271.16Y
    ADN4668ARUZ-REEL7 Production16 ld TSSOPREEL 1000-40 to 85C01.16Y
    ADN4668ARZ Production16 ld SOICOTH 48-40 to 85C1.271.16Y
    ADN4668ARZ-REEL7 Production16 ld SOICREEL 1000-40 to 85C01.16Y
    ADN4668: 3 V LVDS Quad CMOS Differential Line Receiver Data Sheet (Rev. A) adn4668
    ADN4668ARUZ IBIS Model adn4668
    AN-1179: Junction Temperature Calculation for Analog Devices RS-485/RS-422, CAN, and LVDS/M-LVDS Transceivers (Rev. A) adn4670
    AN-1177: LVDS and M-LVDS Circuit Implementation Guide (Rev. 0) adn4670
    AN-1176:二进制.Bxl文件格式的元件尺寸和符号 (Rev. 0) adn4670
    AN-1176: Component Footprints and Symbols in the Binary .Bxl File Format (Rev. 0) adn4670
    AN-1177: LVDS和M-LVDS电路实施指南 (Rev. 0) adn4670