ADP130 350 mA, Low VIN, Low Quiescent Current, CMOS Linear Regulator

The ADP130 is a low quiescent current, low dropout linear regulator. It is designed to operate in dual-supply mode with an input voltage as low as 1.2 V to increase efficiency and provide up to 350 mA of output current. The low 17 mV dropout voltage at a 100 mA load improves efficiency and allows operation over a wider input voltage range. Mobile phones Digital camera and audio devices Portable and battery-powered equipment Post dc-to-dc regulation

A dual-supply power solution typically improves conversion efficiency over a single-supply solution because the higher VBIAS supply powers the part, and the lower VIN supply delivers current to the load. The power dissipated in the device is thereby reduced. The ADP130 is optimized for stable operation with small 1 μF ceramic output capacitors. The ADP130 delivers good transient performance with minimal board area.

The ADP130 is available in fixed output voltages ranging from : 0.80 V to 3.0 V.

The ADP130 has a typical internal soft start time of 200 μs. Short-circuit protection and thermal overload protection circuits prevent damage in adverse conditions. The ADP130 is available in a tiny 5-lead TSOT package for the smallest footprint solution to meet a variety of portable power applications.

Data Sheet, Rev. 0, 8/08

Features and Benefits
  • 350 mA maximum output current
  • Input voltage supply range
    VBIAS = 2.3 V to 5.5 V
    VIN = 1.2 V to 3.6 V
    2.3 V < VIN < 3.6 V, VIN can be tied to VBIAS
  • Very low dropout voltage: 17 mV @ 100 mA load
  • Low quiescent current: 25 μA @ no load
  • Low shutdown current: <1 μA
  • ±1% accuracy @ 25°C
  • Excellent PSRR performance: 70 dB @ 10 kHz
  • Excellent load/line transient response
  • Optimized for small 1 μF ceramic capacitors
  • Current limit and thermal overload protection
  • Logic controlled enable
  • 5-lead TSOT package
  • Power Management
    Design Tools
    Data Sheets
    Documentnote
    ADP130: 350 mA, Low VIN, Low Quiescent Current, CMOS Linear Regulator Data Sheet (Rev. C)PDF 229 kB
    Application Notes
    Documentnote
    AN-1072: How to Successfully Apply Low Dropout RegulatorsPDF 105 kB
    Frequently Asked Questions
    Documentnote
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADP130AUJZ-0.8-R7 Last Time Buy5 ld TSOTREEL 3000-40 to 125C00.33Y
    ADP130AUJZ-1.2-R7 Production5 ld TSOTREEL 3000-40 to 125C00.33Y
    ADP130AUJZ-1.5-R7 Production5 ld TSOTREEL 3000-40 to 125C00.33Y
    ADP130AUJZ-1.8-R7 Production5 ld TSOTREEL 3000-40 to 85C00.33Y
    ADP130AUJZ-2.5-R7 Production5 ld TSOTREEL 3000-40 to 125C00.33Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    ADP130-0.8-EVALZEvaluation Board60Y
    ADP130-1.2-EVALZEvaluation Board60Y
    ADP130-1.5-EVALZEvaluation Board60Y
    ADP130-1.8-EVALZEvaluation Board60Y
    ADP130-2.5-EVALZEvaluation Board60Y
    ADP130UJZ-REDYKITEvaluation Board60Y
    ADP130: 350 mA, Low VIN, Low Quiescent Current, CMOS Linear Regulator Data Sheet (Rev. C) adp130
    ADI Linear Regulator Design Tool and Parametric Search adp2108
    AN-1072: How to Successfully Apply Low Dropout Regulators adp2108
    AN-1072: 在系统中成功运用低压差稳压器 (Rev. 0) adp2108