ADP5303 50 mA/500 mA, Ultralow Power Step-Down Regulator with Battery Voltage Monitor

The ADP5303 is high efficiency, ultralow quiescent current step-down regulator that draws only 240 nA quiescent current to regulate the output at no load.

The ADP5303 runs from an input voltage of 2.15 V to 6.50 V, allowing the use of multiple alkaline or NiMH cells, Li-Ion cells, or other power sources. The output voltage is selectable from 0.8 V to 5.0 V by an external VID resistor and a factory fuse. The total solution requires only four tiny external components.

The ADP5303 can operate between hysteresis mode and PWM mode via the SYNC/MODE pin. In hysteresis mode, the regulator achieves excellent efficiency at less than 1 mW and provides up to 50 mA of output current. In PWM mode, the regulator produces a lower output ripple and supplies up to 500 mA of output current. The flexible configuration capability during operation of the device enables very efficient power management to meet both long battery life and low system noise requirements.

The ADP5303 integrates an ultralow power comparator with a factory programmable voltage reference to monitor the input battery voltage. The regulator runs at a 2 MHz switching frequency in PWM mode and the SYNC/MODE pin can be synchronized to an external clock from 1.5 MHz to 2.5 MHz.

Other key features in the ADP5303 include separate enabling, QOD, and safety features such as overcurrent protection (OCP), thermal shutdown (TSD), and input undervoltage lockout (UVLO).

The ADP5303 is available in 9-ball, 1.65 mm × 1.87 mm WLCSP package rated for the −40°C to +125°C junction temperature range.

Applications
  • Energy (gas, water) metering
  • Portable and battery-powered equipment
  • Medical applications
  • Keep-alive power supply
Features and Benefits
  • Input supply voltage range: 2.15 V to 6.50 V
  • Operates down to 2.00 V
  • Ultralow 240 nA quiescent current with no load
  • Selectable output voltages of 1.2 V to 3.6 V, or 0.8 V to 5.0 V
  • ±1.5% output accuracy over the full temperature range in pulse-width modulation (PWM) mode
  • Selectable hysteresis mode or PWM operation mode
  • Output current
    • Up to 50 mA in hysteresis mode
    • Up to 500 mA in PWM mode
  • Up to 50 mA in hysteresis mode
  • Up to 500 mA in PWM mode
  • VINOK flag to monitor input battery voltage
  • 100% duty cycle operation mode
  • 2 MHz switching frequency with optional synchronization input from 1.5 MHz to 2.5 MHz
  • See data sheet for additional features
  • Power Management
    Data Sheets
    Documentnote
    ADP5303: 50 mA/500 mA, Ultralow Power Step-Down Regulator With Battery Voltage Monitor Data Sheet (Rev. A)PDF 749.86 K
    Application Notes
    Documentnote
    AN-1406: Designing an Inverting Power Supply Using the ADP5300/ADP5301/ ADP5302/ADP5303 Ultralow Power, Step-Down DC-to-DC Regulators (Rev. 0)PDF 224.29 K
    User Guides
    Documentnote
    UG-881: Evaluating the ADP5303 Ultralow Step-Down Regulator (Rev. 0)PDF 744.98 K
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADP5303ACBZ-1-R7 Production9-Ball Wafer Level Chip Scale Package [WLCSP]REEL 3000-40 to 125C00.95Y
    ADP5303ACBZ-2-R7 Production9-Ball Wafer Level Chip Scale Package [WLCSP]REEL 3000-40 to 125C00.95Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    ADP5303-EVALZEvaluation Board49Y
    ADP5303: 50 mA/500 mA, Ultralow Power Step-Down Regulator With Battery Voltage Monitor Data Sheet (Rev. A) adp5303
    AN-1406: 采用超低功耗、降压DC-DC稳压器ADP5300/ADP5301/ADP5302/ADP5303设计反相电源 (Rev. 0) adp5301
    AN-1406: Designing an Inverting Power Supply Using the ADP5300/ADP5301/ ADP5302/ADP5303 Ultralow Power, Step-Down DC-to-DC Regul adp5301
    UG-881: Evaluating the ADP5303 Ultralow Step-Down Regulator (Rev. 0) adp5303