ADuM4136 Single-/Dual-Supply, High Voltage Isolated IGBT Gate Driver

The ADuM4136 is a single-channel gate driver specifically optimized for driving insulated gate bipolar transistors (IGBTs). Analog Devices, Inc., iCoupler® technology provides isolation between the input signal and the output gate drive.

Operation with unipolar or bipolar secondary supplies is possible, allowing negative gate drive if needed.

The Analog Devices chip scale transformers also provide isolated communication of control information between the high voltage and low voltage domains of the chip. Information on the status of the chip can be read back from dedicated outputs. Control of resetting the device after a fault on the secondary side is performed on the primary side of the device.

Integrated onto the ADuM4136 is a desaturation detection circuit that provides protection against high voltage short-circuit IGBT operation. The desaturation protection contains noise reducing features such as a 312 ns (typical) masking time after a switching event to mask voltage spikes due to initial turn-on. An internal 537 μA (typical) current source allows low device count, and the internal blanking switch allows the addition of an external current source if more noise immunity is needed.

The secondary UVLO is set to 12 V with common IGBT threshold levels taken into consideration.

Applications
  • MOSFET/IGBT gate drivers
  • Photovoltaic (PV) inverters
  • Motor drives
  • Power supplies
Features and Benefits
  • 4 A peak drive output capability
  • Output power device resistance < 1Ω
  • Desaturation protection
    Isolated Fault output
    Soft Shutdown on Fault
  • Isolated Fault and Ready functions
  • Low propagation delay 55 ns typical
  • Minimum pulse width: 50 ns
  • Operating temperature range: −40°C to +125°C
  • Output voltage range to 35 V
  • See data sheet for additional features
  • Interface & Isolation
    IBIS Models
    Data Sheets
    Documentnote
    ADuM4136: Single-/Dual-Supply, High Voltage Isolated IGBT Gate Driver Data Sheet (Rev. 0)PDF 647.91 K
    Application Notes
    Documentnote
    AN-1316: Generating Multiple Isolated Bias Rails for IGBT Motor Drives with Flyback, SEPIC, and Ćuk Combination (Rev. 0)PDF 522.41 K
    User Guides
    Documentnote
    UG-1019: Evaluation Board for the ADuM4136 Coupler, Dual-Supply, High Voltage, Isolated IGBT Gate Driver (Rev. 0)PDF 307.39 K
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADUM4136BRIZ Pre-Release16 ld SOIC (increased Creepage)OTH 37-40 to 125C00Y
    ADUM4136BRIZ-RL Pre-Release16 ld SOIC (increased Creepage)REEL 1000-40 to 125C00Y
    ADUM4136BRWZ Production16 ld SOIC - WideOTH 47-40 to 125C2.82.15Y
    ADUM4136BRWZ-RL Production16 ld SOIC - WideREEL 1000-40 to 125C02.15Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    EVAL-ADUM4136EBZEvaluation Board50Y
    Reference Materials
    ADuM4136: Single-/Dual-Supply, High Voltage Isolated IGBT Gate Driver Data Sheet (Rev. 0) adum4136
    ADuM4136 IBIS Model adum4136
    AN-1316: 利用反激、 SEPIC 和 Ćuk 组合为 IGBT 电机驱动产生多个隔离偏置轨 (Rev. 0) adp1621
    AN-1316: Generating Multiple Isolated Bias Rails for IGBT Motor Drives with Flyback, SEPIC, and Ćuk Combination (Rev. 0) ad7403
    UG-1019: Evaluation Board for the ADuM4136 Coupler, Dual-Supply, High Voltage, Isolated IGBT Gate Driver (Rev. 0) adum4136
    工业电机驱动中的栅极驱 动和电流反馈信号隔离 adum4135