HMC-ALH244-DIE Low Noise Amplifier Chip, 24 - 40 GHz

The HMC-ALH244 is a two stage GaAs MMIC HEMT Low Noise Amplifier die which operates between 24 and 40 GHz. The amplifier provides 12 dB of gain, a noise figure of 3.5 dB, and requires only 45 mA from a +4V supply voltage. The HMC-ALH244 amplifier die is ideal for integration into Multi-Chip-Modules (MCMs) due to its small size (3.5 mm2).

Applications
  • Point-to-Point Radios
  • Point-to-Multi-Point Radios
  • VSAT
  • SATCOM
Features and Benefits
  • Noise Figure: 3.5 dB
  • Gain: 12 dB
  • P1dB Output Power: +13 dBm
  • Supply Voltage: +4V @ 45 mA
  • Die Size: 2.50 x 1.4 x 0.1 mm
  • Amplifiers
    S-Parameters
    Data Sheets
    Documentnote
    HMC-ALH244 Data SheetPDF 546.11 K
    Application Notes
    Documentnote
    AN-1363: Meeting Biasing Requirements of Externally Biased RF/Microwave Amplifiers with Active Bias Controllers (Rev. 0)PDF 804.11 K
    MMIC Amplifier Biasing Procedure Application NotePDF 435.1 K
    Broadband Biasing of Amplifiers General Application NotePDF 433.77 K
    Thermal Management for Surface Mount Components General Application NotePDF 189.99 K
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    HMC-ALH244 ProductionCHIPS OR DIEOTH 2525C59.3148.04Y
    HMC-ALH244-SX ProductionCHIPS OR DIEREEL 200Y
    Reference Materials
    Datasheet
    HMC-ALH244 Data Sheet hmc-alh244-die
    Other
    38, 60 & 82 GHz MMICs for High Capacity Communication Links hmc-sdd112
    AN-1363: Meeting Biasing Requirements of Externally Biased RF/Microwave Amplifiers with Active Bias Controllers (Rev. 0) hmc8120
    AN-1363: 利用有源偏置控制器满足外部偏置射频/微波放大器的偏置要求 (Rev. 0) hmc8120
    Broadband Biasing of Amplifiers General Application Note hmc1049lp5e
    HMC-ALH244 S-Parameter hmc-alh244-die
    MMIC Amplifier Biasing Procedure Application Note hmc1049lp5e
    Thermal Management for Surface Mount Components General Application Note hmc1049lp5e